Salta al contenuto principale
Domanda Chiusa

Why does my iMac A1058 turns off when loading?

it turns on normally and it makes the sounds, LED 1 is on, LED 2 and 3 turn on as well, it stays in the blank screen with the apple and the loading circle, after a few minutes the fans spin faster and it shuts down after that.

Any ideas?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
1 Commento

What happens when you try to start up from your system installation disk?

da

Aggiungi un commento

1 Risposta

Soluzione Prescelta

Fans spinning faster=overheat of a component... could be the CPU, or the GPU. On a machine of that age I would suspect dry thermal paste allowing the CPU to overheat. Since it's open... let it cool down overnight. Find a good fan to point at (into) the case and attempt to run AHT - with the extra air flow you may be able to run long enough to get results from AHT - if the first run shows no problem it's pointing to overheating (it just isn't hot enough yet) see if you can run AHT a 2nd and 3rd time, you may get a useable result.

Good Luck,

If this answer was helpful please remember to mark it accepted.''

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 337