Salta al contenuto principale

Model A1224 / Mid 2007 and Early 2008 / 2, 2.4, or 2.66 GHz Core 2 Duo processor

548 Domande Visualizza tutte

BeePing and black screen after replace HD

I replaced a new HD, plugged my iMac on and nothing. Black screen and beeping. I put the recovery disc in and can not take it out. How can I install a new software? Why my computer is beeping and what a problem with the screen?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio -1
Aggiungi un commento

1 Risposta

Soluzione Prescelta

Depending upon the number and duration of the beeps you damaged (shorted), loosened or disconnected a RAM chip. Check the RAM seat - they snap in firmly... if they are not loose try running ONE CHIP in one side, then the other (only one chip/slot may be bad).

If this answer was helpful please remember to mark it accepted.''

Questa risposta è stata utile?

Punteggio 1
Aggiungi un commento

Aggiungi la tua risposta

Anna sarà eternamente grato.
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 626