Salta al contenuto principale
Domanda Chiusa

Replacing HD Step 13 calls for Torx T6

Following your instructions for the removal/replacement of the HD

PowerBook G4 Aluminum 12" 1-1.5 GHz Hard Drive Replacement

at Step 13 it indicates that there are 2 hex screws. I have a Torx T6 driver but it just spins in those screws.

Any recommendations on how to get those screws out (and back in)?

Risposto! Visualizza la risposta Anch'io ho questo problema

Questa è una buona domanda?

Punteggio 0
Aggiungi un commento

1 Risposta

Soluzione Prescelta

On the comments area beneath steps 9 to 16:

"I found that a T7 Torx screwdriver worked better for removing the two hex screws" slessard, Nov 7 2009 @ 2:33 PM

Questa risposta è stata utile?

Punteggio 0
Aggiungi un commento
Visualizza Statistiche:

Ultime 24 Ore: 0

Ultimi 7 Giorni: 0

Ultimi 30 Giorni: 0

Tutti i Tempi: 318