My iPhone 7 plus fell on the ground yesterday while I was recording a video, after this the video started to give a buzz sound at first and then and it records videos but with no sound after that I’m not able to record any voice notes, or even call

I tried to use earphones but the phone doesn’t recognise it even a wireless one the phone recognised it but doesn’t record or call

Also so many things are messed up in the software and the phone is acting strange ex: sometimes doesn’t press on video record button, instagram bugs sometimes doesn’t save the story etc

I just need to know if it is a mic issue or a software issue

Is it possible that falling on the ground causes software issue ? And if its a mic issue why still not working with a wireless headphones

⟐ Answer edited gennaio 23, 2024 at 0:53 GMT-7

⟐ Answered gennaio 03, 2024 at 2:09 GMT-7

I am re-ordering iPhone 7 Plus LCD Screen and Digitizer Full Assembly / New / Part Only / White due to the back layer of the display assembly that provides the light that shines through the LCD ribbon ripped. although I was very careful when installing I believe the ribbon may have already had a tare when I received the part. After viewing the ribbon on your website compared to what I received the ribbon did not look the same. I assumed this is how the ribbon was suppose to look.

Does ifixit discount for a problem like this?

Thank you for your time

Desiree

⟐ Answered luglio 31, 2023 at 3:14 GMT-7

⟐ Commented luglio 26, 2023 at 23:00 GMT-7

⟐ Answered aprile 28, 2023 at 16:50 GMT-7

Thanks!

⟐ Answer edited agosto 30, 2022 at 15:58 GMT-7

⟐ Answered aprile 20, 2022 at 13:31 GMT-7

So then I put in the aftermarket battery and it booted perfectly, but whenever I’d plug it in to charge, it’d give me the “This accessory may not be supported” message. I was at iOS 10 at that point and knew about the lawsuit or whatever and updated to iOS 11 most recent and still didn’t fix it. So I got a used original battery with the Apple logo on it and tried that and STILL giving me the message, now with everything original Apple parts. So then I was thinking “hmm.. maybe I damaged the lightning cable connector when swapping it into the new case.” So I just got a new lightning cable connector but its not original Apple and will still charge for a split second then stop and say the “This accessory may not be supported” message.

I really just want my phone back, is there anyway I can still fix it myself? Is there some red flag that sets off whenever non-apple parts are put in and then you HAVE to bring it to the store?

⟐ Answered aprile 13, 2022 at 7:49 GMT-7

I replaced my screen, with one from iFixit, and and while the screen, Touch ID, Camera etc work fine, I seem to now be missing the option to enable auto-brightness. This makes the phone very hard to adapt between indoor and outdoor lighting conditions without manually having to change it all day long. And leaving it at a higher brightness results in horrible battery life.

⟐ Commented febbraio 24, 2022 at 22:47 GMT-7

⟐ Answered settembre 16, 2021 at 11:31 GMT-7

buyer if it is likely to stop working because of this mark. Is it a water mark?

⟐ Answer edited febbraio 23, 2021 at 7:43 GMT-7

That’s what I’ve found underneath. Is there a possibility to repair those pads?

⟐ Answer accepted ottobre 09, 2020 at 20:50 GMT-7

I have an iPhone 7 Plus which didn’t have any known physical issues up to now. The other night I installed the latest Apple software on my phone and then straight after the attempted software update (big mistake!) my iPhone went into a continuous boot loop where the Apple logo is constantly displayed.

i took the phone to the Apple Store Genius Bar and as I guessed they were just following a set script in terms of the useless help they try to give customers. they advised I either update the software or restore the phone which wipes all content. Restore is not an option for me as my data is not backed up so after trying the update option and waiting 20 mins for it to complete, turns out it failed to

resolve the boot loop issue.

i took the phone to my local iPhone repair shop who

talked a lot more sense and they said I need to get the ic chip repaired but I wanted to check with any of you who have had the same issue if this is the correct thing to do?

thanks

⟐ Answer accepted settembre 30, 2020 at 19:30 GMT-7

⟐ Commented agosto 10, 2020 at 9:38 GMT-7

⟐ Commented agosto 02, 2020 at 18:00 GMT-7

⟐ Answer edited luglio 01, 2020 at 9:15 GMT-7

⟐ Answer accepted maggio 23, 2020 at 17:35 GMT-7

Just replacement my iPhone 7+ front assembly today. Had to trouble shoot a few things along the way, but the oddest thing is happening now. The home button isn't working but touch ID/finger print is working. For example I can hit the power button and then place my finger on the home button and my iPhone will unlock but pressing it won't do anything. Any ideas? I've tried a reset (power + volume down button for 10 seconds) but that doesn't seem to do the trick.

Ideas?

⟐ Answer accepted ottobre 31, 2019 at 4:28 GMT-7

Now the site has only set for iPhone 6 Plus Replacement Battery (Product code: IF269-002-2). Interested in a similar set only for the iPhone 7 plus.

⟐ Commented ottobre 10, 2019 at 4:16 GMT-7

⟐ Commented maggio 11, 2019 at 5:46 GMT-7