iFixit - Answers With Device "iPhone 6 Plus"

iPhone 6 Plus: How to fix water damage phone with corrosion

Mon, 20 Jul 2020 10:20:37 -0700

It powers on with Apple logo only when you plug into an outlet, won't power on with computer. When it is on it does turn on completely, but instead reboots with Apple logo and repeats.

⟐ Answered luglio 20, 2020 at 10:20 GMT-7

iPhone 6 Plus: My phone touch is not working

Sun, 19 Jul 2020 17:35:58 -0700

hello

i have iphone 6 plus

its touch is not working

some time its works for 5 sec but mostly not working

i faced this problem since last 3 days

please tell me whats the reason?

and its solution

Thanks

Abbas

⟐ Answered luglio 19, 2020 at 17:35 GMT-7

iPhone 6 Plus: please your help about this screen type

Tue, 30 Jun 2020 02:22:25 -0700

hello for all please can you tell me is this a 6 plus screen or a 6 screen and is it original

or not ???

⟐ Answered giugno 30, 2020 at 2:22 GMT-7

iPhone 6 Plus: Why does the battery icon jump and the phone is dinging

Fri, 19 Jun 2020 07:50:49 -0700

when I try to charge my phone it keeps dinging and the battery icon at the top right keeps jumping back and forth

⟐ Answered giugno 19, 2020 at 7:50 GMT-7

iPhone 6 Plus: Replaced battery, but now I have a black screen with 4 white lines do

Tue, 31 Mar 2020 18:42:13 -0700

I have a 6 Plus 128 gig iPhone and I just replacing the battery and use the guide here. No problems got apart and battery out was so happy. Put new battery in. Booted the phone and now I have a black screen with 4 white lines running down the middle of the screen. Tried several time reset the cables mainly the display data cable. I even did what it said to do and power cycle your phone. Still black screen with white lines. Can some tell me what is wrong and how I can fix it? Please.

Thank you

⟐ Commented marzo 31, 2020 at 18:42 GMT-7

iPhone 6 Plus: Why does my loudspeaker not work after lightning port replacement?

Sat, 22 Feb 2020 19:38:15 -0700

Hey guys, so I ordered a lightning port replacement as my phone was in dire need of a new one due to the charging being really dodgy. So just now after replacing it, putting it all back together, the phone powers on (hooray!). However I'm surprised by the fact that my loudspeaker does not work! It creates like a short static noise like when you turn a speaker on. Can anyone point me in the direction of an answer please? Thanks :)

EDIT:

The loudspeaker had been working perfectly before the lightning connector replacement. Also just went play a video on facebook and the whole phone restarted!

EDIT 2:

My earpiece speaker by the frontfacing camera no longer works either! Completely confused

⟐ Commented febbraio 22, 2020 at 19:38 GMT-7

iPhone 6 Plus: How can you transfer old chips onto new logic board

Thu, 19 Dec 2019 11:54:59 -0700

I was wondering after seeing tons and tons of bare logic board on ebay was how can you transfer the stuff over and/or who can do this service

⟐ Commented dicembre 19, 2019 at 11:54 GMT-7

iPhone 6 Plus: My iPhone keyboard is lagging

Sun, 24 Nov 2019 11:40:57 -0700

My iPhone keyboard is lagging really bad I've tried resetting my keyboard and restarting my phone several times but nothing worked . When I type it takes 40seconds+ to type a single word does anyone know how to fix this?

⟐ Answer accepted novembre 24, 2019 at 11:40 GMT-7

iPhone 6 Plus: iPhone 6 Plus tristar donor board pulled pad.

Fri, 22 Nov 2019 05:44:26 -0700

I am new to microsoldering, I was wicking the board to clean it off, and I ended up pulling two pads at the bottom left of the board. Had the microsoldering at 380 is this to hot to wick the board? By the way this is a donor board.

the two on the first column were pulled. Can I still put the tristar chip on or is it dead.

⟐ Answer accepted novembre 22, 2019 at 5:44 GMT-7

iPhone 6 Plus: I phone 6 plus wont turn on after battery got empty.

Mon, 18 Nov 2019 05:53:59 -0700

my i phone 6 plus wont turn on after battery got empty. before that while i am charging the charging percentage remains same. there i no increaing. like that i charrged for 1 day. there is no change. but when i connect charger some times one percentage will increase or decrease. when charger disconnect it bcome old condition.

⟐ Answer accepted novembre 18, 2019 at 5:53 GMT-7

iPhone 6 Plus: Phone restarts every 2-3 minutes

Sun, 17 Nov 2019 10:58:32 -0700

I have this iphone 6 plus that was dead and I tried to restore it in recovery mode but got 4013 error a few times. Desoldered the nand and replaced it with another nand ( all the data like SN, wifi mac, bt mac,etc writen on the replacement nand from the old nand). After I soldered the “new” nand in place I managed to restore it without error, but now the phone keeps restarting every 2-3 minutes. The phone has wifi,gsm service, everything works fine in those 2-3 minutes.

What do you think might be the problem?

⟐ Commented novembre 17, 2019 at 10:58 GMT-7

iPhone 6 Plus: Touch screen doesn't work!

Wed, 13 Nov 2019 05:23:57 -0700

I purchased a replacement screen for my iPhone 6 Plus from fixit and immediately after replacing the screen the screen i realized the screen kind of flashes at the top of the screen and you have to press the screen in just the right place in order to get the touch screen to work. I already disconnected and connected the connectors and they are connected just fine. I hope i just got a faulty screen and nothing is wrong with the phone. i am worried though, because i had gotten a replacement screen from a local repair shop and the touch screen only worked for about a week and then the screen got very glitchy touch screen wise. i hope it isn't anything to do with my phone, as it is out of warranty, and i don't have lots of money to get a new phone.

i looked for any "banana'd" connectors, and the touch screen connector was slightly... well... banana'd. i pushed on it gently to straighten it out again and tried reconnecting the connectors to the logic board. No luck. touch screen still doesn't respond and top of the screen flashes.

Any help is greatly appreciated!!! I called Ifixit and they are sending a new screen. it that fixes the problem i will let you guys know.

⟐ Answer accepted novembre 13, 2019 at 5:23 GMT-7

iPhone 6 Plus: iPhone not charging after new charge port, VCC_main cap missing

Wed, 30 Oct 2019 17:23:48 -0700

Would the capacitor c5202_rf (its missing for some reason) be the reason why the device will not take on power? Or should i replace tristar? Battery is fine and charging port. No short on VCC_main.

⟐ Commented ottobre 30, 2019 at 17:23 GMT-7

iPhone 6 Plus: iPhone no image error

Mon, 28 Oct 2019 15:57:13 -0700

Hello,

Greeting's to everyone. I am struggling with Iphone 6 plus. The phone turns on , is recognized by itunes and the backlight is working also..

But there is no image at all on the LCD.. Phone is not water-damaged - the indicator's look white and clean.

Also under microscope did not found any damage to board.

Could someone give me some hint's what to do next ?

Chestnut (U1501) ?

Update.

I have measured up the lines which should be responsible for image..

PP_VCC_MAIN - 3,6 V ( measured on C1554)

P6V0_LCM_BOOST - 6V (measured on C1502)

PN5V7_SAGE_AVDDN - 5,7 V (measured on C1504)

P5V7_SAGE_AVDDH- 5.7 V (measured on C1577)

PP5V7_LCM_AVDDH - 5,7 V (measured on C1569)

PP5V1_GRAPE_VDD - 5,1 V (measured on C1541)

What i should test next ?

Hello,

So i did a new measurements today again with fresh head.

The result is the same except :

PN5V7_SAGE_AVDDN - minus 0,37 (measured on C1504)

So i have a short on that line. So the options are for me :

1)C1504 ; FL2061; C2044 or can it be the chestnut himself?

Thank you for your attention.

Hello to everyone,

Happily i was enable to find out the shorted caps (it was C2049) removed it from the board and voila image on lcd !

Big thanks to Minho for helping.

⟐ Answer accepted ottobre 28, 2019 at 15:57 GMT-7

iPhone 6 Plus: Help to identify component and where to source?

Sat, 05 Oct 2019 06:56:31 -0700

Hey guys, I have an iPhone 6 Plus that won't power on.

I inspected the logic board and see that this component seems crushed, like its snapped in half:

Does anyone know where to get a replacement for this component? Would this component being damaged cause no power condition? Thanks for any help.

⟐ Answer accepted ottobre 05, 2019 at 6:56 GMT-7

iPhone 6 Plus: iPhone 6 Plus BUTTON_TO_AP_HOLD_KEY_L cut issue

Fri, 04 Oct 2019 04:50:56 -0700

as in photo below

if the line

BUTTON_TO_AP_HOLD_KEY_L

from power ic to GPU

was cut by removing resistor etc

what are the effects

and what are the function of

BUTTON_TO_AP_HOLD_KEY_L

⟐ Answer accepted ottobre 04, 2019 at 4:50 GMT-7

iPhone 6 Plus: Weak Wifi or poor Signal

Fri, 27 Sep 2019 07:30:46 -0700

This iPhone only sees near WiFi networks. The more far away the router the more poor signal

I have replaced this antenna:

iPhone 6 Plus 5GHz Wi-Fi Antenna

And no differnece

SHould I try with this?

iPhone 6 Plus Wi-Fi/Bluetooth Antenna

Thank you

Hi, no antennas have fixed the problem. It seems to be a hardware issue. I will send to my friend’s lab to see if it can be fixed. I will post the results. Thank you

⟐ Answered settembre 27, 2019 at 7:30 GMT-7

iPhone 6 Plus: Startup anomaly after iPhone battery replacement

Thu, 12 Sep 2019 17:06:52 -0700

Just did a battery replacement on my iPhone 6 Plus and the phone won’t start up when I press the power button. Got it to start up eventually only by connecting the phone to a power source (PC/AC Adapter) and pressing the power button for 15-20 seconds (subsequent restarts were normal, the anomaly is present only in the first start up after installing the new battery). Is this normal?

⟐ Answer accepted settembre 12, 2019 at 17:06 GMT-7

iPhone 6 Plus: iPhone 6 Plus Battery Replacement - "Battery Health" issue.

Wed, 28 Aug 2019 16:54:24 -0700

I’m on the latest iOS… so I am starting a new question.

I just replaced the battery using iFixit battery kit (which was awesome!).

Now, the battery health doesn’t seem to function correctly. It won’t give status of the battery in %.

Before I changed the battery, the origional Apple battery showed 84% and I had a couple of crashes with warnings due to the battery.

Now, I have read that even if one was to take advantage to Apple’s Battery Replacement Program, this issue would still happen on the Apple batteries.

There must be some ‘reset’ function in the OS to get the proper reading on the battery…

What is it?

⟐ Answered agosto 28, 2019 at 16:54 GMT-7

iPhone 6 Plus: WIFI issues after screen replacement

Tue, 27 Aug 2019 20:28:06 -0700

I dropped my phone a few weeks ago and it shattered the screen, lost functionality of the home button but it still operated fine up until the screen was replaced. I did it myself to save on costs. Removal went pretty smooth, i was able to get the old screen out and the replacement came with the parts already installed so i didn’t have to bother with swapping over the existing pieces. I did lose the ability to use the touch id but i can live with that. I decided to re install the os and start fresh after the repair work. Once i got to the part where i needed to connect it to my WIFI i noticed it could not locate the signal from my room.. But if i stood near the router it worked flawlessly.

I had no issues with the wifi antenna before i replaced the screen but now it seems as if the antenna has become unplugged or has been damaged.

⟐ Answer accepted agosto 27, 2019 at 20:28 GMT-7