⟐ Answered giugno 19, 2025 at 6:33 GMT-7

⟐ Answered aprile 11, 2025 at 16:03 GMT-7

⟐ Answered marzo 07, 2025 at 11:34 GMT-7

che ne pensate?

⟐ Edited by author aprile 30, 2025 at 8:20 GMT-7

⟐ Commented maggio 04, 2024 at 16:43 GMT-7

⟐ Commented giugno 18, 2023 at 18:36 GMT-7

My friend wanted

help cleaning the glass on her oven door. Of course since I’m a “know it all”, on repairing things I volunteered.

We got the thing all torn down and cleaned the glass but it seems the bottom of the glass door is swinging free and I can find no way of attaching it. So Mr Know it All Repair guy has utterly failed with this repair and must come crying for help. It all looks fine and hangs OK but the bottom swings out when the door is opened. I can see no way to attach it. How about it @ladytech, can you help me out?

⟐ Commented maggio 12, 2025 at 12:22 GMT-7

⟐ Commented maggio 18, 2024 at 8:08 GMT-7

⟐ Commented settembre 05, 2023 at 11:49 GMT-7

I'll start by saying that I thought maybe it was the breaker, so I replaced it. But the issue predicts

Whenever I run my dryer, I "trip" the main breaker. But not really. Everything shuts off in the house and I have to manually flip the main off and then back on.

I can run 2 A/Cs, 2 box fans, 2 ceiling fans, the oven and the stove with lights on wherever in the house with no issues at all. But as soon as the dryer is turned on, boom. Power is out. We've tried it with EVERYTHING off in the house with the exception of the kitchen light and still, no power. Sometimes it happens within minutes, sometimes it runs for 20+.

A couple weeks ago it stopped happening for a few days... I honestly don't know what it could be. It's not hooked up to a brand new 30amp 2-pole breaker, the dryer itself is only a couple of years old, and the issue didn't start until a few months ago. I don't know where to even begin troubleshooting...

Any ideas?

⟐ Commented novembre 26, 2021 at 20:18 GMT-7

There is five wires connecting the control circuit with the the device main circuit but I don't know which of them should be connected with which to turn it on.

I even don't know if this is possible.

Thanks a lot

⟐ Answered luglio 07, 2024 at 1:48 GMT-7

⟐ Commented novembre 24, 2023 at 0:37 GMT-7

I'll set it to something like 350F, then when it beeps I'll open the door, put something in, then close the door. The display will still indicate that the temperature is 350F, but the temperature inside the oven will slowly decrease. It sounds like the relays for the elements are clicking away and I can hear the convection fan turning on and off, but the temperature goes down (I checked this with a separate oven thermometer that I bought at a local hardware store). If I wait about 5 minutes and turn the oven off and back on again it will indicate that the temperature is something like 300F and bring it back up to 350F, but after that it will do the same thing again. Sometimes it will go way over temperature too (sometimes 25-40F over), but that's less common.

I had a repairman out to look at the stove but he wasn't sure what the issue was and thought it might be the main control board for the oven. I ordered a replacement off reliable parts and put it in just today, but the same problem happened. The repair guy said that it probably wasn't the temperature sensor because they either work or they don't, but at this point I have no idea if he knows what he's talking about. I also had it happen today that the separate thermometer said the oven was at 375F and when I turned the oven off and on again the oven said it was at 325F and heated up until it thought it was at 350F when the separate thermometer read 400F.

Does anyone know what's going on? Any help is appreciated.

⟐ Answer edited settembre 03, 2023 at 19:20 GMT-7

⟐ Commented gennaio 12, 2025 at 0:21 GMT-7

⟐ Answer edited dicembre 19, 2024 at 16:02 GMT-7

⟐ Commented gennaio 29, 2023 at 13:06 GMT-7