⟐ Answered febbraio 10, 2022 at 8:03 GMT-7

grazie

⟐ Answered febbraio 03, 2023 at 18:54 GMT-7

Posso eventualmente tagliarlo per sostituire il lettore micro SD con uno nuovo? Grazie in anticipo per l'aiuto!

⟐ Answered febbraio 01, 2023 at 17:49 GMT-7

⟐ Answered dicembre 21, 2022 at 2:29 GMT-7

⟐ Commented gennaio 19, 2026 at 13:19 GMT-7

Buongiorno avrei una domanda, purtroppo il gatto se mangiato il cavo del caricabatterie della Nintendo switch, ora sfilando il cavo mi trovo 5 fili , 2 neri, 2 bianchi ed uno blu. Non volendo collegare i cavi a caso (i 2 neri e i 2 bianchi) . Qualcuno sa l'esatto collegamento dei cavi, c'è differenza fra i cavi bianchi e quelli neri? grazie per il vostro aiuto .

Good morning, I have a question. Unfortunately, the Nintendo Switch charger cable broke. Now, when I unplug it, I find five wires: two black, two white, and one blue. I don't want to connect the cables randomly (the two black ones and the two white ones). Does anyone know the exact connection of the cables? Is there a difference between the black and white ones? Thanks for your help.

⟐ Commented agosto 19, 2025 at 4:00 GMT-7

⟐ Answered aprile 10, 2025 at 11:03 GMT-7

⟐ Answer edited marzo 23, 2023 at 2:24 GMT-7

in seguito all'aggiornamento software di dicembre 2025 la mia switch ha cominciato a presentare problemi.

Si surriscalda, va in blocco e la batteria dura pochissimo.

Ho provato a sostituire la ventola con una nuova ma continua a non funzionare.

Che cosa potrebbe essere?

grazie saluti

⟐ Answered gennaio 26, 2026 at 13:24 GMT-7

So, my Switch stopped taking any charge whatsoever and would not turn on. So, I replaced the battery. Now the Switch comes on, displays the "Nintendo" Logo, and then goes to an error screen. The code I'm getting is 2101-0001. Is there any way to fix this?

Thanks for the help in advance!

⟐ Commented dicembre 17, 2025 at 21:49 GMT-7

⟐ Answered giugno 18, 2025 at 14:54 GMT-7

⟐ Answered dicembre 13, 2021 at 11:48 GMT-7

Recently I got a Nintendo Switch that suddenly stopped charging.

Now it is completely dead. Black screen, no battery charging signal whatsoever.

When it is placed on the dock, the green light starts blinking fast and stays that way until unplugged.

I tried replacing the battery to no avail.

I´m not sure if the USB-C port could be the problem, or maybe i need to replace the M92T36 charging power control chip, or the BQ24193.

Any suggestions on how to find out the damaged part?

Thanks in advance!

UPDATE:

I managed to get the system started with the new battery, everything works, but when i connect the psu in the charging port it doesnt respond. It shows no signal of charging. When the charger is connected, the system starts to overheat (even when it is off).

It seems this is a port problem. What do you think?

⟐ Answered maggio 08, 2023 at 7:02 GMT-7

**UPDATE** 8/17/20

So it doesn’t really seem like we’ve found a working combination yet, I made a google spreadsheet so we can keep track of what has been tried and what works. Feel free to add your own attempts/info so we can track down what works! Link below:

https://docs.google.com/spreadsheets/d/1...

**UPDATE** 9/24/20

Thanks to @metrons for finding a solution (works for non-patched switches). According to CTCaer on github (writer of Hekate), there are four versions of the switch digitizer. These are not cross compatible unless you re-calibrate your touchscreen using third-party software (e.g. Hekate). If you have an older non-patched switch, load Hekate and try the touchscreen calibration under “tools”. Make sure to use the latest version of Hekate, as only the newer ones have joy-con support allowing you to navigate to the calibration utility without touch. If the calibration fails, it most likely means you have a loose connection or the digitizer is trashed; try unplugging and reinserting the ribbon cable (worked for me).

I’m still hoping we can find a way to match digitizers for those with patched switches! Thanks for your help everyone!

⟐ Commented maggio 22, 2025 at 10:52 GMT-7

⟐ Answered luglio 07, 2024 at 12:07 GMT-7

Essentially my switch is stuck at boot on the switch logo. This happened after it froze on a blank screen for the first time (white with a slight orangy tint) while waking it up from sleep while docked using the Joy-Cons.

I’ve never used any third-party dock or charger, no water, no falls.

Could this be a hardware issue?

Initially I thought so because of the similarity to the dock issues, but after running some tests (see below) I thought it might be software related. Fixing the software didn’t help either though, so I’m still not sure what the issue is.

• Switch is stuck on boot at switch logo.
• Joy-Cons sync up immediately when powered on.
• Charging via official charger works.
• While docked the green light quickly flashes and then stays dark. No HDMI output, built-in screen remains on.
• Screen, Joy-Cons, Touchscreen, Sound, USB-C port, SD-card reader, etc. all works.

• Hard reset via power button
• Completely discharging and recharging it
• Entering recovery mode -> not possible, since it gets stuck on switch logo before
• Entering safe mode -> this is actually possible but it doesn't seem to do anything (the square rotates but the progress bar stays empty for hours)

• Opening it up and checking for shorts on some of the capacitors (especially charging ICs) -> nothing

Note that I only starting messing with the software after it bricked to diagnose and fix the issue.

• RCM mode, payloads, and custom bootloader work fine.
• Full NAND backup/restore works.
• CFWs do not boot! They are stuck at the same place as the OFW.
• Linux with Retroarch boots and works flawlessly as far as I could tell from a quick test.

At this point I'm thinking the hardware is fine, and it's just the OS that messed itself up somehow and since the CFWs are more like patches than independent firmwares, it makes sense that they would be affected as well. So

• I flashed two different official firmware versions (6.1 and 5.1) using ChoiDuJour (PC) thinking that would fix it, but neither of them were able to get past the switch logo either.

Sorry for the long post and thanks for reading this far!

Edit: formatting & picture, as per suggestion

⟐ Commented ottobre 22, 2025 at 11:59 GMT-7

I got dead console, no recipe for gurantee so I'm alone.

Console doesn't respond on anything. Console is getting very warm when it's plugged to original PSU. I think battery is charging because when i plug off PSU, for some time switch stays warm. What should I do? I'am thinking about new battery but this will not be that easy right? Maybe someone know what chip is need to be replaced ? I think the blue one but what do you think guys? https://2.allegroimg.com/original/03fb0c...

By the way, when i plug it into dock. Green light shows for 1 second when console get contact with usb.

⟐ Commented gennaio 24, 2024 at 14:55 GMT-7

⟐ Answered settembre 16, 2022 at 10:22 GMT-7