iFixit - Answers With Device "Nespresso"

Nespresso inissia: Pompa funziona ma acqua non arriva

Wed, 01 Apr 2026 06:21:47 -0700

Pompa funziona ma non arriva acqua

Nespresso VertuoPlus Deluxe: Dopo decalcificazione Nespresso VertuoPlus spia metà rossa e verde

Fri, 15 Mar 2024 01:26:49 -0700

Ho fatto la decalcificazione già due volte e il pulsante è sempre metà rosso e metà verde. Riprovo per la terza e ultima volta stasera, dopo di che deciderò se non comprare una nuova macchina o affidarmi alla tradizionale moka! Non voglio spendere 75 euro per una riparazione...

Raffaele De Benedictis

⟐ Answered marzo 15, 2024 at 1:26 GMT-7

Nespresso inissia: Cerco o-ring Nespresso Inissia

Mon, 27 Nov 2023 11:15:42 -0700

Salve! Cerco o-ring di ricambio per Nespresso Inissia. Dove si può acquistare ?

Grazie Riccardo

⟐ Answered novembre 27, 2023 at 11:15 GMT-7

Nespresso: Dopo decalcificazione Nespresso VertuoPlus spia metà rossa e verde

Thu, 12 Oct 2023 13:54:41 -0700

Dopo decalcificazione vertuto plus metà spia rossa e metà verde pur avendo provato ad uscire da descalin. Grazie

⟐ Answered ottobre 12, 2023 at 13:54 GMT-7

Nespresso CitiZ: Steam from handle and water in the inside container

Fri, 07 Aug 2026 13:51:20 -0700

All of the sudden my Citiz has started making trouble and I’m hoping to solve it myself with your help :)

When I’m brewing coffee the handle gets very hot and there is steam coming from the handle. Water is also getting out inside the machine and runs out into the internal container. When I use it with out a capsule there is no problem at all.

I’ve descaled it, but it didn’t solve the issue. I’ve also tried rinsing the inside of the part where the coffee runs trough with a toothbrush.

Can anyone help me troubleshoot this and maybe let me know, what spareparts I need to fix it. It would be a hugs help!

All the best

Stella

Nespresso Delonghi Lattissima Touch: Latissima Touch - Fails to complete the descaling process

Wed, 22 Jul 2026 15:54:12 -0700

Tried to descale the machine (when prompted by the flashing light).

Descaling cycle completed, but after filling the tank with fresh water the machine switched off when the froth button was pressed to start the rinse cycle.

Tried to run the whole process three times - no change.

So can't complete the rinse and the descale light continues to flash.

Any similar experience and suggested fix out there?

⟐ Answered luglio 22, 2026 at 15:54 GMT-7

Nespresso CitiZ: Leaked after perfereted plate

Wed, 22 Jul 2026 15:49:57 -0700

Hi,

I have noticed that some of the coffee is leaked into the collector basket. In between the nossle and the brewing unit. I have taken the machine apart and tried to install a new brewing unit but some coffe Is still leaked into the collector basket. I have tried to clean the plate that punctures the pod but still coffee leakage happens. Any idea what could cause this and how I can fix it?

Fredrik

⟐ Answered luglio 22, 2026 at 15:49 GMT-7

Krups Nespresso XN 2140: There’s not enough coffee extracted.

Wed, 22 Jul 2026 15:43:43 -0700

There’s not enough coffee extracted.

⟐ Commented luglio 22, 2026 at 15:43 GMT-7

Nespresso U: The spout is not moving into the correct position

Wed, 22 Jul 2026 15:42:09 -0700

The coffee is going straight into the waste container as opposed to coming out through the spout. It appears that the spout is not dropping down into the correct position. How do you ensure that the spout does drop in the correct position when the mechanism starts?

⟐ Answered luglio 22, 2026 at 15:42 GMT-7

Nespresso Vertuoline: Light blinking two times, pause, two times, etc.

Tue, 21 Jul 2026 23:15:41 -0700

How can I resolve the two-blink error on this machine without returning it?

⟐ Commented luglio 21, 2026 at 23:15 GMT-7

Nespresso CitiZ: Nespresso Citiz coffee machine - pump not activating

Sat, 07 Feb 2026 11:44:28 -0700

Hi,

I have a Nespresso Citiz coffee machine. It was working properly and in daily use. However, earlier this week it was descaled but during the descale process it completed the two descale stages but then it refused to do the rinse stages.

The machine has since been unplugged and the factory reset process applied.

Now when I try to use it:
I plug the machine in.
Press a button to activate it, both lights flash to show it is warming up.
After a short wait, both lights remain on to show the machine has warmed up.
A button (lungo or espresso) is pressed, it flashes and the other button light remains lit (I remember this being the pressed light remaining on and the other light goes off when it was working properly).
After a short while, the blinking light goes solid again and both lights remain lit.

There is no sound of the pump working. All the above happens in silence.

Any help very greatly appreciated.

⟐ Answered febbraio 07, 2026 at 11:44 GMT-7

Nespresso: Why is my nespresso espresso watery?

Mon, 02 Feb 2026 18:49:19 -0700

I have a DeLonghi Type EN 125S Ser No 81626 S300075 Nespresso machine. the espesso comes out watery, little crema. my wife has run descaler, and cleaned it up. i read that it may be the gasket. I can't find if there should be a gasket that sits on top of the espresso pod when the chamber is closed (handle closed with pod in side). I read that there is another gasket, and youtube findings, that sits below the plastic pod holder that seals the high pressure water when the handle is closed and the spring compressed so this seal is a high/low pressure boundary. I bought a gasket, but it seems to big, not the 31.5 mm ID that it seems the other one are. (1) should there be a gasket that sits on top of the capsule (2) if so, where can I order replacement (3) provide help on the "other" gasket under the pod plastic chamber, if that could be the problem, and where to buy. Thanks for the help!

Nespresso CitiZ: Nespresso CitiZ coffee machine, some water is leaking into collection

Sun, 25 Jan 2026 12:55:21 -0700

I have a Nespresso CitiZ coffee machine and some water is leaking into the collection tray without passing through the coffee pod. I assume that an internal seal has worn out. How easy is to renew the seal and from where can it be sourced?

⟐ Commented gennaio 25, 2026 at 12:55 GMT-7

Nespresso: Descaling problem with Vertuo Plus

Tue, 09 Dec 2025 14:03:54 -0700

The orange/green light came on which means my Vertuo Plus needed descaling. I have done this several time before but this time after the whole descaling cycle was finished, the orange/green light came on again. Any ideas? Do I need to descale it again?

Nespresso Pixie Repair: Where does this piece go!

Fri, 05 Dec 2025 08:26:12 -0700

I followed video on how to take apart machine to clean diffuser plate, put back together and have a black plastic piece left over. Have seen others with same problem but no-one has an answer. It would make my day to know!

⟐ Commented dicembre 05, 2025 at 8:26 GMT-7

nespresso lattis: Brew unit - mouting pieces

Fri, 05 Dec 2025 08:20:20 -0700

I've just cleaned my Nespresso but during drying process, two pieces has been removed from brew unit. I'm sure that the little plastic pipe is from the brew unit but have a doubt about the little black plastic piece with the copper spring.

Does anyone knows how to mount these pieces into the brew unit please ?

As you can see here, the brew unit piece (I've unmounted all the parts after the pieces came out of here) and the two little pieces

And here is the hole where the one or two pieces came from

⟐ Answered dicembre 05, 2025 at 8:20 GMT-7

Nespresso inissia: Machine not piercing the capsule—water leaks out the back

Fri, 05 Dec 2025 08:05:17 -0700

Hello, After placing the coffee capsule and firmly closing the capsule compartment (capsule holder), I activate the machine. The water is pumped, but it escapes behind the capsule into the used capsule container (capsule bin). I open the compartment and see that the capsule has not been pierced—neither from the front nor the back. What could be the cause of this issue?

⟐ Answered dicembre 05, 2025 at 8:05 GMT-7

Nespresso inissia: My machine still makes coffee but water leaks out. How can I fix it?

Fri, 05 Dec 2025 08:01:17 -0700

My machine still makes coffee, but lots of water leaks through at the same time, I have to put a tray underneath to collect it. How can I fix that myself?

⟐ Answered dicembre 05, 2025 at 8:01 GMT-7

Nespresso VertuoPlus Deluxe: find a water leak

Tue, 04 Nov 2025 05:01:44 -0700

water appears under the coffee machine after a few hours, even though the coffee machine is turned off

⟐ Edited by author novembre 04, 2025 at 5:01 GMT-7

Nespresso inissia: Pump is not starting.

Mon, 20 Oct 2025 09:14:04 -0700

Breville Inissia. Lights flash and then steady. Press button and lights flash (like normal cycle, water heats) but the pump never starts (no noise) then buttons stop flashing, like brew has completed. Have tried priming, but think that it is something else, as there is no pump noise.

⟐ Answered ottobre 20, 2025 at 9:14 GMT-7