⟐ Answered aprile 13, 2023 at 5:25 GMT-7

Grazie

⟐ Commented gennaio 07, 2023 at 7:27 GMT-7

⟐ Answer accepted maggio 02, 2019 at 19:00 GMT-7

davvero da diverso tempo riscontro questo problema.

Ho tentato il reset di SMC, PRAM e ho tentato pure di pulirlo, ma non ha portato a niente. Infine aggiungo che la maggior parte delle volte succede quando il PC è sotto sforzo.

è possibile sia difettoso in qualche modo?

Grazie

Andrea

⟐ Answer accepted settembre 06, 2020 at 14:52 GMT-7

⟐ Answered agosto 17, 2025 at 4:55 GMT-7

⟐ Answered febbraio 24, 2023 at 11:01 GMT-7

Sto cercando di sostituire l’SSD di serie con quello in oggetto. Già provati 3 diversi adattatori ma senza successo. Qualcuno ha qualche suggerimento da darmi o indicarmi un adattatore testato personalmente? Grazie mille in anticipo.

⟐ Commented gennaio 04, 2022 at 5:49 GMT-7

MacBook Air 13" (Mid 2013-2017) I/O Board

ma posso ordinarlo anche sul sito europa oppure devo procedere con l’ordine sul sito usa ??

grazie

Carlo

No purtroppo esiste solo sul sito usa, quindi mi tocca comprarlo la .

ok grazie

Carlo

⟐ Edited by author giugno 06, 2021 at 22:56 GMT-7

Io, pensando fosse un semplice problema di tastiera guasta, l’ho sostitutita e per un mazze giornata è andato tutto bene. La mattina dopo ha smesso di funzionare la diagonale 3EDC.. Pensando alla tastiera difettosa me la sono fatta rimandare, ma dopo un giorno ha smesso nuovamente di funzionare la diagonale 3EDC…

Non so che pesci prendere!

⟐ Answered febbraio 12, 2021 at 6:39 GMT-7

Grazie e saluti.

⟐ Answered agosto 16, 2020 at 23:20 GMT-7

⟐ Answer accepted settembre 10, 2019 at 18:45 GMT-7

dovrei cambiare la batteria ad un MaxBook Air 13" di Mid 2012. Ho visto che in rete se ne trovano parecchie tipologie compatibili. Volendone acquistare una originale senza ricorrere all'assistenza Apple, sarebbe possibile o non si trovano in giro? Sapreste indicarmi dove/come trovarle?

Grazie.

⟐ Answered aprile 11, 2017 at 10:03 GMT-7

English: swap out logic board of a MacBook Air in 2008

Hi, I wanted to know if it was possible to replace the logic board of a 2008 MacBook Air with a more powerful version like a 2012.

⟐ Commented agosto 16, 2016 at 12:57 GMT-7

Qualcuno può aiutarmi a capire se il mac è facilmente riparabile e senza spendere troppo visto che è del 2017?

sono riuscita a sostituire il monitor da sola e tutto per diverse settimane è andato benissimo. Il mac era perfetto.

Dopo qualche giorno ha smesso di funzionare improvvisamente.

L'ho trovato spento e non da segni di vita.

Ho provato anche ad aprirlo e ricontrollare il connettore della batteria ma non succede nulla.

Qualcuno può aiutarmi?

After some brief surfing around this morning, I went to work with my MacBook running fine as usual. After coming home, my keyboard and trackpad are both unresponsive. What's a bit more unsettling is that, in the System Preferences, it's not even recognizing a trackpad as being connected.

After doing some searching around, I've found that some people ran into this issue with MacBook Pros, and it was because of a ribbon that had become loose underneath the battery. I'm wondering if it's possibly the same problem for me with my MacBook Air. I hadn't read about anyone with an Air experiencing the same problem.

Any help would be appreciated.I would love to get my Air working so I don't have to constantly use my external keyboard/mouse.

Thanks!

Edit: The only key that works on the keyboard is the power button.

⟐ Answered luglio 07, 2025 at 6:09 GMT-7

⟐ Answered febbraio 03, 2026 at 10:27 GMT-7

Right after a normal reboot, it suddenly stopped working: I get the startup chime, a bright white screen (without the Apple logo or pointer), and nothing else. If I don't shut it off, the fan starts working after a few minutes. If I close down the lid, the screen remains lit.

I've tried all the usual fixes and combinations:

• Plug in the "system install" pen drive
• Reset the SMC
• Reset the PRAM
• Hold down the Option key
• Hold down the C key (for rEFIt)
• Battery powered, MagSafe powered...

Nothing works!

I just get the chime and the permanent white screen. I don't have any kind of adapters, so I can't check anything involving cable connections. Is there something else I can try? Am I facing a broken logic board? Can it break "just like that"?

Well, folks: I finally found out what went wrong, and I'll try to explain it as well as my ignorance of Apple hardware, OS-X software, and firmware, and computers in general, allows me.

But first things first. I have good news for you: if you ever get the white screen of death. don't panic! And, unless still under guarantee, don't take your computer to an Apple center for them to steal you yet more money by making you pay for a new logic board and/or a new hard drive. Probably you can solve the problem by yourself, spending only a few -very well invested- dollars in a pentalobed or a Phillips #00 screwdriver, plus maybe a Torx T5 one.

Please correct me if I'm wrong, but, as far as I've guessed and investigated, it works like this: Your MacBook Air's firmware (probably also any other MacBook system, but I can't be sure about that) is always instructed to try to, in the first place, boot off certain piece of hardware: be it the hard disk, an external DVD unit, the installed USB stick, or a network boot server. This option can be set in the OS's Startup Manager. When the actual boot setting is any other than the hard drive, then, at boot time, the firmware will look for the instructed medium to boot off, and if for whatever reason it doesn't find it, then it will try to boot off the hard drive as a "last resource". BUT, when the actual boot setting is "hard drive" and, for whatever reason, the data is corrupted or something is wrong with the boot sector, then the computer will NOT try to find any alternative device, or a network, where to boot off: it will keep forever trying to boot off the hard drive, and thus you get the dreaded white screen of death. The Apple engineers are so smart!!

But it's actually not dead: neither your motherboard nor your drive is dead. They're just in a deep coma.

How can you wake it up from this coma? Simple: remove the back cover and disconnect the hard drive. Believe me: with the right screwdriver, it's very easy to do and even you can do it. Then, and only then, if there is NO hard drive where to try to boot off, the firmware is programmed to look for some other medium: USB stick, external DVD, network... So, plug this medium in and... voilá! There you get your little spinning animated icon and, eventually, the Apple's apple; the startup disk will boot and there you are anew to life.

Now, once you've managed to boot, the FIRST thing you have to do is go to the Startup Manager and set the firmware to boot off your whatever startup medium is (otherwise, upon reboot you'll be in the same S*ITuation). After this, you can plug back in your hard drive and reboot your computer. Hopefully, it will boot off as instructed (the USB/DVD/Network), it will recognize your hard disk, and you can use the Disk Utility to repair it, reformat it, or whatever you want to do with it. After this, everything will go back to normal, and you've saved the Apple care center's $500 bill.

Hope this will help someone to avoid the three weeks anguish I've gone through... I'm sorry to say that it is A SHAME on Apple's part to sell such cr*p and not respond for it, nor inform about it on their support page, but joyfully get your money when you take your laptop to repair.

Welcome any correction or precision to this post.

⟐ Commented maggio 04, 2023 at 17:46 GMT-7

I have a macbook air A1304 the wireless (wi-fi) has stopped working, and shows a warning saying that there is no hardware installed.

already dismantled the airport passed clean contact on flex cable and the card itself, but it did not work

tested the bluetooth works perfectly.

what should I do? buy a new airport? I recently bought on ebay but as I live in Brazil shipping time takes about 20 to 30 days

thank you!

hugs

I left my macbook the day off, when I turn got a surprise.

recognized the wifi but can not connect to any network.

and after restarting the computer informs not have wifi hardware.

⟐ Answer deleted febbraio 18, 2021 at 1:10 GMT-7