iFixit - Answers With Device "Epson Printer"

Epson EcoTank L3110: In fase di stampa la carta alle volte viene

Sat, 02 May 2026 23:33:09 -0700

In fase di stampa la carta alle volte viene Trascinata a metà e si blocca

Epson Printer: Stampante epson wf 7210 errore 0031

Tue, 16 Dec 2025 00:46:04 -0700

Epson errore 0031 soluzioni riparabile

Epson XP-225: Ho una stampante modello Epson XP 332

Sat, 13 Dec 2025 11:53:55 -0700

Ho cambiato le cartucce della stampante esaurite ne ho messe quelle nuove come richiesto dalla casa costruttrice. Ma, il carrello non torna più nella sua posizione pronta per stampare si e in pratica bloccata nella posizione di cambio cartucce come posso risolvere ?

massimiliano.fusco66@gmail.com grazie per l'aiuto

xp 640: Riconoscimento delle cartucce compatibili

Tue, 15 Apr 2025 09:04:36 -0700

Buongiorno , ho una epson 640, ma dopo aggiornamento firmware non riconosce piu le cartucce compatibili.
E possibile far riconoscere le cartucce?

⟐ Answered aprile 15, 2025 at 9:04 GMT-7

Epson Printer: Risoluzione errore 034004 su Epson wf-2810

Mon, 30 Sep 2024 01:33:57 -0700

Buon giorno, cosa devo fare se questa tecnica a me non funziona e continua a darmi errore? Io ho un epson wf-2810,grazie

⟐ Edited settembre 30, 2024 at 1:33 GMT-7

Epson Printer: ERRORE 0xf3 EPSON WF7610. Cosa fare?

Thu, 28 Sep 2023 02:30:59 -0700

Ho una stampante EPSON WF 7610 , visualizzo il codice errore 0xf3 cosa devo fare per la risoluzione? Chi puo’ aiutarmi?

CERCO DISPERATAMENTE UN AIUTO

⟐ Answered settembre 28, 2023 at 2:30 GMT-7

Epson WF-2540: Error Epson bloccata 4D

Sat, 22 Sep 2018 05:41:51 -0700

Possiedo una Epson WF-"2650 e si è bloccata usando lo scanner dandomi il seguente messaggio errore 4D e non si sblocca neanche se la spengo e la riaccendo.

Cortesemente qualcuno può dirmi come risolvere il problema? Grazie

Pino

Epson Printer: Epson cs-t2100 driver does not recognize roll width

Tue, 07 Jul 2026 05:49:07 -0700

I insert a 450mm roll into the SC-T2100 plotter and the plotter recognizes it with that width. When I want to print, the drivers do not recognize that width, but set 432mm as the closest smaller width from the list in the roll paper width field and lock that field. Can that list be supplemented with a width of 450mm or possibly change some of the existing values.

⟐ Answered luglio 07, 2026 at 5:49 GMT-7

Epson WF-3640: Epson WF-3640 paper jam message, spring and gear fell out

Tue, 07 Jul 2026 01:34:01 -0700

I queued way too many papers for my printer to handle and it got jammed. I had no idea I can open up the back side to remove it so I opened the scanner unit and forcefully pulled out the paper from under the roller, so I think I broke something.

I found a small gear that came out but I reattached it ( red circle ) but there's also a spring that I have no idea where it came from. Check it attached photo, you can see the spring right there

⟐ Answered luglio 07, 2026 at 1:34 GMT-7

Epson Printer: My printer acts like it is printing, but NOTHING appears on the paper.

Sun, 05 Jul 2026 06:51:45 -0700

Everything looks and acts fine but the paper is empty. I have a low M cartridge (should arrive tomorrow) but it won't print anything on b/w mode either.

⟐ Commented luglio 05, 2026 at 6:51 GMT-7

Epson L220 Printer: My L220 epson printer ink and bond paper red lights are blinking

Sat, 04 Jul 2026 00:14:19 -0700

My printer isn't lacking out of ink. Also, my printer doesn't print, itdoesn't want to get/bite the bond paper in. The red lights keep on blinking please help ASAP

⟐ Answered luglio 04, 2026 at 0:14 GMT-7

Epson XP-960: Preparing to print CD/DVD everytime I try to print document

Fri, 03 Jul 2026 08:19:26 -0700

Trying to print document and every time I send to printer, message comes up

"preparing to print CD/DVD" then

"close the output tray all the way inside before inserting CD/DVD tray"

Have checked for updates all up to date.

⟐ Commented luglio 03, 2026 at 8:19 GMT-7

Epson Stylus NX240: Why can't my printer connect to my wireless network?

Fri, 03 Jul 2026 03:35:17 -0700

My printer doesn't seem to be able to find my home wireless network. When I turn my printer on, my home wireless network doesn't appear. What can I do?

⟐ Answered luglio 03, 2026 at 3:35 GMT-7

Epson Printer: Problem with recognizing the width of the roll

Fri, 03 Jul 2026 01:05:27 -0700

I have a plotter SC-T2100. When I insert a 450mm wide roll, the plotter recognizes it and measures it correctly. But when I want to print, the drivers recognize it in the roll paper width field as a roll with a width of 432 mm and that field cannot be changed. Is this possible to solve

Epson Printer: Error says paper jam, but there is not. What could cause this?

Fri, 03 Jul 2026 00:12:14 -0700

I have an Epson Artisan 837 all in one. It was working perfectly fine yesterday. Today it is telling me I have a paper jam. I went through the steps it told me to take 3 times. There is no paper jammed anywhere! Each time I finish the steps and turn it back on, it makes a grinding sound, then I get the same paper jam error message. I need some helpful advice if anyone has seen this before, please tell me what I should do.

⟐ Commented luglio 03, 2026 at 0:12 GMT-7

Epson Printer L6170: My printer keeps printing blank pages and gives a paper size error

Thu, 02 Jul 2026 06:26:21 -0700

My printer keeps printing blank pages and gives a paper size error, how to fix it?

1、The paper size settings match on both the computer and the printer.

2、This issue happens randomly—sometimes on the very first page, and sometimes in the middle of a print job.

3、I have already replaced the pick-up roller, but the error persists. It still randomly prints blank pages and reports a paper size mismatch.

Now I heavily suspect it is an issue with the PE sensor (registration sensor) or its return spring. Any advice on how to clean or replace the sensor spring for Epson ET-3750?

Epson Printer: Epson Expression Home XP-5200 - Error 100016

Wed, 01 Jul 2026 05:47:41 -0700

Hello, I just bought an Epson Expression Home XP-5200 from a seller on eBay, and it arrived with the mentioned fault. I notified the seller, and they refunded me and told me to keep the printer.

I have now looked up this error and found many fixes.

Here is what I have tried so far.

1) Removed power cable while printer on, waited 60 sec, held power button for 30 secs, plugged power cable back in

Outcome: Ran printer, same issue.

2) Removed the side cover, unplugged the two ribbon cables nas the reseated the, the smaller one with the blue tab facing down, and the larger one with the blue tab facing up.

Outcome: Ran printer, same issue

3) Removed the scanner completely, opened the scanner and checked all cables. Moved the carriage over to the middle, gave everything a clean, and put it all back together.

Outcome: Ran printer; scanner carriage moved to the start position, then the error code appeared again.

Now, one of the suggested fixes for these issues is a firmware update; however, the error screen will not let me do anything. I can't reset the printer, which was another suggestion. I have no ink in the printer, which was another suggestion for the error code, but I still have no way to bypass the error screen.

So, please, if anyone knows how or if I can bypass the error screen, I may be able to reset the printer. Or is this just a brick destined for land fill (recycle)

⟐ Answered luglio 01, 2026 at 5:47 GMT-7

epson l3150: Black Ink Not Printing on Epson L3150 Printer After Refilling Cartridg

Wed, 01 Jul 2026 01:09:04 -0700

I have an Epson L3150 printer that stopped printing black ink after the cartridge ran out. I refilled the cartridge manually, but the printer still doesn't print in black. I have tried cleaning the print head several times, but it didn't solve the problem. The printer prints in other colors normally. Could you please help me troubleshoot and fix this issue?

⟐ Commented luglio 01, 2026 at 1:09 GMT-7

work force pro printer 4630: Problem downgrading the firmware of an Epson WF-7840

Mon, 29 Jun 2026 07:10:41 -0700

Good morning everyone,

I've had the bad idea to upgrade the firmware of our Epson WF-7840 (version CD17M6 now).

Now, our non epson cartridges are not recognised anymore.

I've search the web about how to downgrade the firmware. I found the procedure, found how to put the printer in "recovery mode" and, on the Epson website, I found the "Recovery Mode Firmware version CB08LC" for the Epson WF-7840.

But it doesn't work...

First problem, the model of the printer does not appear in the "Epson firmware updater" but it sees that a printer is connected.

Second problem, and it is where it stops, when I launch the Update, it fails with a message on the printer's screen "Data file not found".

I tried with my mac (macbook pro 16" m1 max) and with an older macbook pro from 2009 with the same result. I tried with another USB cable and still no luck.

What am I doing wrong?

⟐ Answered giugno 29, 2026 at 7:10 GMT-7

Epson EcoTank L3110: Doest print clearly unless change settings to high quality

Sun, 28 Jun 2026 00:57:38 -0700

Usually print with lines the 2nd pages

⟐ Answered giugno 28, 2026 at 0:57 GMT-7