<![CDATA[iFixit - Answers With Device "DeLonghi Coffee Maker"]]> https://it.ifixit.com/Risposte/Device/DeLonghi_Coffee_Maker?rss=yes en-US Tue, 07 Jul 2026 02:31:33 -0700 <![CDATA[DeLonghi Coffee Maker: Lattissima one non scende il latte e si accendono tutte le luci]]> La mia lattissima one non parte più il latte dopo aver aspettato che parta , si accendono tutte le luci e non parte

]]> https://it.ifixit.com/Risposte/Visualizza/946803/Lattissima+one+non+scende+il+latte+e+si+accendono+tutte+le+luci https://it.ifixit.com/Risposte/View/946803 Wed, 25 Mar 2026 09:50:23 -0700 <![CDATA[De'Longhi EC155: Why is there no espresso coming out when the pump is on?]]> The machine is on and everything else is working fine, but when I turn the pump on, nothing comes out and I have no idea why.

⟐ Commented gennaio 07, 2026 at 15:43 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/264322/Why+is+there+no+espresso+coming+out+when+the+pump+is+on https://it.ifixit.com/Risposte/View/264322 Wed, 07 Jan 2026 15:43:28 -0700 <![CDATA[De'Longhi EC155: Constant Dripping from diffuser]]> My DeLonghi EC155 drips constantly from the diffuser. Is there a valve or gasket in side that needs replacing?

⟐ Commented luglio 01, 2022 at 6:13 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/292861/Constant+Dripping+from+diffuser https://it.ifixit.com/Risposte/View/292861 Fri, 01 Jul 2022 06:13:36 -0700 <![CDATA[DeLonghi BCO430: I have a De’Longhi all in one machine model # Bco 330T]]> The coffee maker portion of the machine is not heating up, I don’t hear the coil heating the water. The espresso maker portion works fine is this repairable?

⟐ Answered luglio 23, 2024 at 20:57 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/648819/I+have+a+De%E2%80%99Longhi+all+in+one+machine+model+%23+Bco+330T https://it.ifixit.com/Risposte/View/648819 Tue, 23 Jul 2024 20:57:39 -0700 <![CDATA[DeLonghi ESAM Family: Delonghi ESAM4200S stuck on red triangle when power on]]> Hello, I have a Delonghi ESAM4200s with the red triangle led that lights up and stays on when I switch on. (Sometimes, 1 cup and 2 cups leds are on too).

I used the test mode (press and hold 1 cup + steam and switch on), everything worked perfectly except the thermoblock. No led turns on when I pushed the « Rinse » button, it doesn't heat up. So I checked its resistance and it was good (38ohms). The thermofuses are good too. The thermosensor is good too (10kohms). I tried replacing the power supply board and nothing changed. I checked the all switches and all works fine.

Do you have any advice on what I should check?

Block Image

⟐ Edited maggio 05, 2026 at 11:55 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/877264/Delonghi+ESAM4200S+stuck+on+red+triangle+when+power+on https://it.ifixit.com/Risposte/View/877264 Tue, 05 May 2026 11:55:27 -0700 <![CDATA[De'Longhi EC155: Cleaning the boiler outlet]]> I can’t get the screw out to clean the boiler outlet. It seems to be welded in. Water won’t pump through. Do I have to throw the whole machine away because the screw won’t come out?

Update (01/08/2020)

Here are the pictures of the screw I can’t get out and the boiler holder (holds the coffee filter).

Block Image
Block Image

⟐ Comment deleted febbraio 27, 2022 at 22:04 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/610846/Cleaning+the+boiler+outlet https://it.ifixit.com/Risposte/View/610846 Sun, 27 Feb 2022 22:04:19 -0700 <![CDATA[Delonghi ECAM 23.120: Why is my water going to the water tray instead of the spouts]]> When purging and brewing a lot of the water or coffee goes into the drip tray

]]> https://it.ifixit.com/Risposte/Visualizza/939679/Why+is+my+water+going+to+the+water+tray+instead+of+the+spouts https://it.ifixit.com/Risposte/View/939679 Sat, 07 Feb 2026 08:22:22 -0700 <![CDATA[DeLonghi BCO430: There fog in my timer]]> Hello I made a cappuccino and I think some water spilled to the clock and is now foggy how do I fix it ?

Update (10/08/2022)

Can you see the images? not sure if it got uploaded properly

Update (10/08/2022)

Block Image
Block Image
Block Image

Did these images come ok?

⟐ Answered ottobre 09, 2022 at 3:34 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/748125/There+fog+in+my+timer https://it.ifixit.com/Risposte/View/748125 Sun, 09 Oct 2022 03:34:53 -0700 <![CDATA[DeLonghi Dedica EC680: Weird Sounds on my Dedica]]>

Hi! Before returning the product, I just want to confirm if my machine is defective. Whenever I try to use the hot water mode or try a double espresso mode, it sounds like world war 2. Thank you

⟐ Answer accepted marzo 27, 2025 at 4:10 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/799619/Weird+Sounds+on+my+Dedica https://it.ifixit.com/Risposte/View/799619 Thu, 27 Mar 2025 04:10:11 -0700 <![CDATA[DeLonghi ECAM Series: Time set coffee grinder]]> I am working on a DeLonghi coffee machine type ECAM22.110.SB.

Does anyone know how I can make the coffee grinder run longer on each cycle of the coffee machine?

Kind regards Martin Repair cafe Oss

⟐ Edited maggio 05, 2026 at 12:10 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/837300/Time+set+coffee+grinder https://it.ifixit.com/Risposte/View/837300 Tue, 05 May 2026 12:10:25 -0700 <![CDATA[DeLonghi ESAM Family: water comes from steam wand not coffee spout]]> Hello, our DeLonghi Magnifica ESAM3300 does not discharge water from the coffee spouts. Instead, the water comes out of the steam wand. Happens even on self-clean cycle when turned on. Coffee spouts are not blocked the infuser cleaned and the machine descaled. Is it the end? Any suggestion?

⟐ Edited maggio 05, 2026 at 11:55 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/711961/water+comes+from+steam+wand+not+coffee+spout https://it.ifixit.com/Risposte/View/711961 Tue, 05 May 2026 11:55:41 -0700 <![CDATA[DeLonghi ESAM Family: My Delonghi 3300 is not making espresso.]]> When i push the button to make espresso on my 3 year old Delonghi 3300, water sometimes comes out of the frothing wand instead of espresso. It does not do this all the time, just periodically. I have checked hoses for blockage and replaced O rings.

⟐ Edited maggio 05, 2026 at 11:55 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/453025/My+Delonghi+3300+is+not+making+espresso. https://it.ifixit.com/Risposte/View/453025 Tue, 05 May 2026 11:55:54 -0700 <![CDATA[De'Longhi EC155: Why is there no froth coming out when I make my cappuccino?]]> After making the content of my drink, the frother does not release any froth onto my drink even though I set it to do so.

⟐ Answered dicembre 24, 2018 at 7:42 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/264326/Why+is+there+no+froth+coming+out+when+I+make+my+cappuccino https://it.ifixit.com/Risposte/View/264326 Mon, 24 Dec 2018 07:42:01 -0700 <![CDATA[DeLonghi ETAM family: ECAM 450.55 G ELETTA EXPLORE replace Standby-Button]]> Hi folks,

Does anyone have an idea how I can disassemble the top section of the Eletta Explore?

I need to replace the standby button.

Thanx

Peter

⟐ Commented giugno 17, 2026 at 14:01 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/959928/ECAM+450.55+G+ELETTA+EXPLORE+replace+Standby-Button https://it.ifixit.com/Risposte/View/959928 Wed, 17 Jun 2026 14:01:06 -0700 <![CDATA[DeLonghi ECAM Series: How do I remove the safety guard from the grinder]]> Mgnifica evo ecam290

⟐ Edited maggio 05, 2026 at 12:10 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/950948/How+do+I+remove+the+safety+guard+from+the+grinder https://it.ifixit.com/Risposte/View/950948 Tue, 05 May 2026 12:10:37 -0700 <![CDATA[DeLonghi ECAM Series: General alarm error will not go away]]> My DeLonghi ecam 35075 start a cycle when I turn it on it runs water through the spouts. Starts heating the water for a couple of minutes. It then goes to general alarm, and I can’t do anything. I’ve cleaned everything inside and out no change. Any suggestions?

⟐ Edited maggio 05, 2026 at 12:10 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/913287/General+alarm+error+will+not+go+away https://it.ifixit.com/Risposte/View/913287 Tue, 05 May 2026 12:10:50 -0700 <![CDATA[DeLonghi Dedica EC680: Hello The espresso machine is extracting half and half and the steam n]]> Hello

The espresso machine is extracting half and half and the steam nozzle is also disconnecting and reconnecting.

⟐ Answer accepted maggio 20, 2025 at 5:34 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/894969/Hello+The+espresso+machine+is+extracting+half+and+half+and+the+steam+n https://it.ifixit.com/Risposte/View/894969 Tue, 20 May 2025 05:34:09 -0700 <![CDATA[De'Longhi EC155: The water wasn't coming out]]> The water wasn't coming out for me and I followed the descaling process and it seems to be coming out now but only if I turn on the steamer for a couple seconds first. Any ideas?

⟐ Edited marzo 28, 2024 at 14:48 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/842687/The+water+wasn't+coming+out https://it.ifixit.com/Risposte/View/842687 Thu, 28 Mar 2024 14:48:15 -0700 <![CDATA[DeLonghi Coffee Maker: My Delonghi EC260 is leaking water from under the water tank]]> Hi, my espresso machine is suddenly leaking water from the base, underneath the water tank. I descaled it & that didn’t help. There are no cracks in the tank and the seal looks good. But I have noticed that the plug inside gets pushed up…water going out…when I put it in the machine. I think it’s only supposed to do that when it’s running but don’t really know. I have to put towels down when I use it now, so water doesn’t go all over the counter. Help!

⟐ Commented dicembre 22, 2023 at 20:06 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/805934/My+Delonghi+EC260+is+leaking+water+from+under+the+water+tank https://it.ifixit.com/Risposte/View/805934 Fri, 22 Dec 2023 20:06:55 -0700 <![CDATA[DeLonghi Coffee Maker: DeLonghi Magnifica: no water coming through]]> Hi everyone,

I got a DeLonghi Magnifica 2 months ago, used it for about 1 week, then emptied and cleaned the tray and left the machine for 6 weeks or so.

When I turn on the machine now, there is never any water coming through, neither upon start-up nor when I press a button. Instead, the water light starts blinking (the reservoir is full). According to the instructions, this indicates too fine a grind. I initially thought the grinder needs to be cleaned, but the machine does push ground coffee through into the tray whenever I press the button, and there is no water when I turn the machine on either, so it seems water-related to me.

Does anyone know what this could be? I thought I might need to descale the machine, but it seems like there is a separate light to indicate that, and since I only had the machine for 2 months and used it for only 1 week, that seems unlikely to me.

Thanks!

⟐ Commented febbraio 07, 2023 at 20:33 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/762615/DeLonghi+Magnifica:+no+water+coming+through https://it.ifixit.com/Risposte/View/762615 Tue, 07 Feb 2023 20:33:38 -0700