<![CDATA[iFixit - Answers With Device "Cricut Maker"]]> https://it.ifixit.com/Risposte/Device/Cricut_Maker?rss=yes en-US Sun, 03 May 2026 13:45:28 -0700 <![CDATA[Cricut Maker: Cerco cavo motore Cricut Maker]]> Nel smontare la scocca esterna ho strappato per errore il cavo di collegamento sul retro del motore principale (passo 24 - 25). Dove posso trovarne uno da sostituire?

⟐ Answered novembre 24, 2024 at 13:25 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/875357/Cerco+cavo+motore+Cricut+Maker https://it.ifixit.com/Risposte/View/875357 Sun, 24 Nov 2024 13:25:19 -0700 <![CDATA[Cricut Maker: Blocco pausa appena avvio il taglio]]> La mia cricut carica il foglio ma quando si sposta per cominciare tutto il processo di lavor, sposta tutto l alloggio verso destra ma poi si blocca e va in pausa… errore 45,84. Cosa può essere? Chiedo aiuto

Aggiorna (09/24/25)

Block Image

Aggiorna (09/24/25)

Block Image

⟐ Edited by author settembre 24, 2025 at 13:32 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/918869/Blocco+pausa+appena+avvio+il+taglio https://it.ifixit.com/Risposte/View/918869 Wed, 24 Sep 2025 13:32:23 -0700 <![CDATA[Cricut Maker: Lama punta fine non taglia]]> Salve ragazzi, la mia cricut non taglia più. In pratica l alloggio che ospita la punta lama punta fine si sposta, facendo un rumore bruttissimo quando si alza e abbassa,ma non taglia. Ho fatto anche un video come posso postarlo?]]> https://it.ifixit.com/Risposte/Visualizza/893709/Lama+punta+fine+non+taglia https://it.ifixit.com/Risposte/View/893709 Sat, 29 Mar 2025 01:23:26 -0700 <![CDATA[Cricut Maker: Lame con ghiera oro non riconosciute]]> Ciao, stavo usando il mio plotter per ritagliare del pannolenci con la lama a rotella, purtroppo durante il taglio si è incastrato il tappettino, o fermato tutto e ho espulso il tappettino. Ora la macchina non mi riconosce più le lame con la ghiera dorata e l’ingranaggio oro all’interno del porta lame, non gira più, cosa posso fare?

L’assistenza mi ha risposto che non ce nulla da fare, la macchina è rotta, ma con tutto quello che costa è vergognoso non avere un assistenza per aggiustarla. E poi ogni volta che si incastra un qualcosa la macchina si rompe? Mi fa da ridere. Se potete aiutarmi vi ringrazio molto

]]> https://it.ifixit.com/Risposte/Visualizza/859843/Lame+con+ghiera+oro+non+riconosciute https://it.ifixit.com/Risposte/View/859843 Wed, 17 Jul 2024 01:28:53 -0700 <![CDATA[Cricut Maker: Where can I aquire replacement grip rollers]]> The plastic/rubber rollers that grip the mat have stretched and now are able to migrate inward and outward on the roller bar. I'm hoping to replace them with something better.

⟐ Commented aprile 05, 2024 at 5:01 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/763145/Where+can+I+aquire+replacement+grip+rollers https://it.ifixit.com/Risposte/View/763145 Fri, 05 Apr 2024 05:01:47 -0700 <![CDATA[Cricut Maker: Where can I get my circut maker repair]]> Where can I get my circut maker repair

⟐ Commented giugno 21, 2025 at 7:39 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/793663/Where+can+I+get+my+circut+maker+repair https://it.ifixit.com/Risposte/View/793663 Sat, 21 Jun 2025 07:39:49 -0700 <![CDATA[Cricut Maker: USB-B port broken. Bluetooth doesn’t work, how can I go about fixing?]]> when i ordered the machine ( Champagne Cricut Maker ) from the original cricut website , i tried changing the name of the machine in my bluetooth settings & ever since the bluetooth hasn’t worked forcing my only connection option via usb. I left my machine at my moms house ( many kids there ) when going out of town, i come back to the usb port being broken. What can i do now besides buying another machine?

⟐ Answered aprile 09, 2025 at 17:29 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/872008/USB-B+port+broken.+Bluetooth+doesn%E2%80%99t+work,+how+can+I+go+about+fixing https://it.ifixit.com/Risposte/View/872008 Wed, 09 Apr 2025 17:29:46 -0700 <![CDATA[Cricut Maker: Cricut Maker Machine repairs]]> Can I request someone to change the rubber rollers on my Cricut Maker machine? If so how?

⟐ Answered novembre 26, 2023 at 21:26 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/825842/Cricut+Maker+Machine+repairs https://it.ifixit.com/Risposte/View/825842 Sun, 26 Nov 2023 21:26:00 -0700 <![CDATA[Cricut Maker: Is a blinking red power button fixable?]]> My power button starts blinking red in the middle of a cut. Is this a fixable problem or any idea what the problem is?

⟐ Answer unaccepted luglio 14, 2023 at 8:22 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/801470/Is+a+blinking+red+power+button+fixable https://it.ifixit.com/Risposte/View/801470 Fri, 14 Jul 2023 08:22:38 -0700 <![CDATA[Cricut Maker: Broken DC barrel jack.]]> I need to replace the DC barrel jack. What size do I need.

⟐ Commented ottobre 05, 2025 at 11:45 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/914511/Broken+DC+barrel+jack. https://it.ifixit.com/Risposte/View/914511 Sun, 05 Oct 2025 11:45:59 -0700 <![CDATA[Cricut Maker: The pen housing on my Cricut maker just keeps going up and down.]]> My cricut maker just stopped working. The pen housing just keeps going up and down and it doesn’t fully turn on. The load button doesn’t load the mat (and pressing it also just results in the housing going up and down).

Here’s a video of what it is doing:

⟐ Answered giugno 14, 2025 at 14:05 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/836004/The+pen+housing+on+my+Cricut+maker+just+keeps+going+up+and+down. https://it.ifixit.com/Risposte/View/836004 Sat, 14 Jun 2025 14:05:34 -0700 <![CDATA[Cricut Maker: Why is the power button remains in red]]> The power button remains red and does not run anymore

⟐ Answered giugno 04, 2024 at 6:25 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/852790/Why+is+the+power+button+remains+in+red https://it.ifixit.com/Risposte/View/852790 Tue, 04 Jun 2024 06:25:05 -0700 <![CDATA[Cricut Maker: Where in Canada can I buy a replacement belt]]> Where in Canada can I get replacement belt for cricut maker

⟐ Answer edited dicembre 30, 2022 at 0:57 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/761804/Where+in+Canada+can+I+buy+a+replacement+belt https://it.ifixit.com/Risposte/View/761804 Fri, 30 Dec 2022 00:57:20 -0700 <![CDATA[Cricut Maker: Get repair piece gear for clamp B]]> Hello everyone

I’ve watched a bunches of YouTube video and dissemble my cricut maker 1 that had a clamp B issue.

After dissembling one piece seemed “melted” or bent I tried to put it back but the dent is broken. I tried to find the detached piece but it’s too specific. Does anybody knows where to find a 3D model of the piece to 3D print it?

I attached some pictures but not sure they uploaded right

Thanks a lot

⟐ Commented dicembre 29, 2025 at 18:19 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/932796/Get+repair+piece+gear+for+clamp+B https://it.ifixit.com/Risposte/View/932796 Mon, 29 Dec 2025 18:19:04 -0700 <![CDATA[Cricut Maker: My lights are not working and will not pull in my mat.]]> So I watched a video to change the rubber on my mat intake. I did everything correct but now my machine is not working and I cannot see it with my computer. The light is not working and will not pull the mat in. What could it be?

]]> https://it.ifixit.com/Risposte/Visualizza/882699/My+lights+are+not+working+and+will+not+pull+in+my+mat. https://it.ifixit.com/Risposte/View/882699 Sun, 05 Jan 2025 22:23:08 -0700 <![CDATA[Cricut Maker: Sensor Light not working]]> The sensor light is not reading on Print Then Cut. Can it be replaced? If so, how?

]]> https://it.ifixit.com/Risposte/Visualizza/880924/Sensor+Light+not+working https://it.ifixit.com/Risposte/View/880924 Wed, 18 Dec 2024 14:44:24 -0700 <![CDATA[Cricut Maker: Is it possible to obtain replacement motherboard for the cricut maker?]]> It’s great to be able to open and figure out where the problem is, but is it actually possible to fix or rather replace the motherboards of a Cricut?

]]> https://it.ifixit.com/Risposte/Visualizza/860953/Is+it+possible+to+obtain+replacement+motherboard+for+the+cricut+maker https://it.ifixit.com/Risposte/View/860953 Wed, 24 Jul 2024 03:29:39 -0700 <![CDATA[Cricut Maker: Cricut maker Gear names]]> One of the gears in the cutting "head" is broken. Where can I get the name of the gears . Want to print a 3 D replica

⟐ Commented giugno 27, 2024 at 15:19 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/856856/Cricut+maker+Gear+names https://it.ifixit.com/Risposte/View/856856 Thu, 27 Jun 2024 15:19:57 -0700 <![CDATA[Cricut Maker: Cricut Maker will not recognize any tools, and will not spin]]> My maker doesn’t recognize the knife or scoring tool. It doesn’t spin and there is nothing online to help fix this problem

⟐ Edited aprile 23, 2024 at 13:36 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/846738/Cricut+Maker+will+not+recognize+any+tools,+and+will+not+spin https://it.ifixit.com/Risposte/View/846738 Tue, 23 Apr 2024 13:36:03 -0700 <![CDATA[Cricut Maker: Question sur la nappe de connexion de la Cricut Maker]]> Nappe de connection pour cricut maker ..il y a combien de pin ?

Merci

⟐ Edited aprile 18, 2024 at 6:11 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/845783/Question+sur+la+nappe+de+connexion+de+la+Cricut+Maker https://it.ifixit.com/Risposte/View/845783 Thu, 18 Apr 2024 06:11:00 -0700