<![CDATA[iFixit - Answers With Device "Cricut"]]> https://it.ifixit.com/Risposte/Device/Cricut?rss=yes en-US Sat, 02 May 2026 22:23:08 -0700 <![CDATA[Cricut Maker: Cerco cavo motore Cricut Maker]]> Nel smontare la scocca esterna ho strappato per errore il cavo di collegamento sul retro del motore principale (passo 24 - 25). Dove posso trovarne uno da sostituire?

⟐ Answered novembre 24, 2024 at 13:25 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/875357/Cerco+cavo+motore+Cricut+Maker https://it.ifixit.com/Risposte/View/875357 Sun, 24 Nov 2024 13:25:19 -0700 <![CDATA[Cricut Maker: Blocco pausa appena avvio il taglio]]> La mia cricut carica il foglio ma quando si sposta per cominciare tutto il processo di lavor, sposta tutto l alloggio verso destra ma poi si blocca e va in pausa… errore 45,84. Cosa può essere? Chiedo aiuto

Aggiorna (09/24/25)

Block Image

Aggiorna (09/24/25)

Block Image

⟐ Edited by author settembre 24, 2025 at 13:32 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/918869/Blocco+pausa+appena+avvio+il+taglio https://it.ifixit.com/Risposte/View/918869 Wed, 24 Sep 2025 13:32:23 -0700 <![CDATA[Cricut Maker: Lama punta fine non taglia]]> Salve ragazzi, la mia cricut non taglia più. In pratica l alloggio che ospita la punta lama punta fine si sposta, facendo un rumore bruttissimo quando si alza e abbassa,ma non taglia. Ho fatto anche un video come posso postarlo?]]> https://it.ifixit.com/Risposte/Visualizza/893709/Lama+punta+fine+non+taglia https://it.ifixit.com/Risposte/View/893709 Sat, 29 Mar 2025 01:23:26 -0700 <![CDATA[Cricut Maker: Lame con ghiera oro non riconosciute]]> Ciao, stavo usando il mio plotter per ritagliare del pannolenci con la lama a rotella, purtroppo durante il taglio si è incastrato il tappettino, o fermato tutto e ho espulso il tappettino. Ora la macchina non mi riconosce più le lame con la ghiera dorata e l’ingranaggio oro all’interno del porta lame, non gira più, cosa posso fare?

L’assistenza mi ha risposto che non ce nulla da fare, la macchina è rotta, ma con tutto quello che costa è vergognoso non avere un assistenza per aggiustarla. E poi ogni volta che si incastra un qualcosa la macchina si rompe? Mi fa da ridere. Se potete aiutarmi vi ringrazio molto

]]> https://it.ifixit.com/Risposte/Visualizza/859843/Lame+con+ghiera+oro+non+riconosciute https://it.ifixit.com/Risposte/View/859843 Wed, 17 Jul 2024 01:28:53 -0700 <![CDATA[Cricut Maker: Where can I aquire replacement grip rollers]]> The plastic/rubber rollers that grip the mat have stretched and now are able to migrate inward and outward on the roller bar. I'm hoping to replace them with something better.

⟐ Commented aprile 05, 2024 at 5:01 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/763145/Where+can+I+aquire+replacement+grip+rollers https://it.ifixit.com/Risposte/View/763145 Fri, 05 Apr 2024 05:01:47 -0700 <![CDATA[Cricut Maker: Where can I get my circut maker repair]]> Where can I get my circut maker repair

⟐ Commented giugno 21, 2025 at 7:39 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/793663/Where+can+I+get+my+circut+maker+repair https://it.ifixit.com/Risposte/View/793663 Sat, 21 Jun 2025 07:39:49 -0700 <![CDATA[Cricut Maker: USB-B port broken. Bluetooth doesn’t work, how can I go about fixing?]]> when i ordered the machine ( Champagne Cricut Maker ) from the original cricut website , i tried changing the name of the machine in my bluetooth settings & ever since the bluetooth hasn’t worked forcing my only connection option via usb. I left my machine at my moms house ( many kids there ) when going out of town, i come back to the usb port being broken. What can i do now besides buying another machine?

⟐ Answered aprile 09, 2025 at 17:29 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/872008/USB-B+port+broken.+Bluetooth+doesn%E2%80%99t+work,+how+can+I+go+about+fixing https://it.ifixit.com/Risposte/View/872008 Wed, 09 Apr 2025 17:29:46 -0700 <![CDATA[Cricut Maker: Cricut Maker Machine repairs]]> Can I request someone to change the rubber rollers on my Cricut Maker machine? If so how?

⟐ Answered novembre 26, 2023 at 21:26 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/825842/Cricut+Maker+Machine+repairs https://it.ifixit.com/Risposte/View/825842 Sun, 26 Nov 2023 21:26:00 -0700 <![CDATA[Cricut Maker 3: Cricut maker won’t turn on]]> Cricut maker turned off during a cutting process and no longer lights up. The Power cable still delivers 23 volts. After that, it briefly turned on but then shut off again. Now it won’t turn on at all. What could be the cause?

]]> https://it.ifixit.com/Risposte/Visualizza/885750/Cricut+maker+won%E2%80%99t+turn+on https://it.ifixit.com/Risposte/View/885750 Tue, 28 Jan 2025 04:53:05 -0700 <![CDATA[Cricut Maker: Is a blinking red power button fixable?]]> My power button starts blinking red in the middle of a cut. Is this a fixable problem or any idea what the problem is?

⟐ Answer unaccepted luglio 14, 2023 at 8:22 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/801470/Is+a+blinking+red+power+button+fixable https://it.ifixit.com/Risposte/View/801470 Fri, 14 Jul 2023 08:22:38 -0700 <![CDATA[Cricut Explore Air 2: Replacement part number for a gear]]> Hello I am looking for a replacement part, I need a new white gear part.

⟐ Answered novembre 21, 2025 at 11:43 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/927170/Replacement+part+number+for+a+gear https://it.ifixit.com/Risposte/View/927170 Fri, 21 Nov 2025 11:43:01 -0700 <![CDATA[Cricut Maker: Broken DC barrel jack.]]> I need to replace the DC barrel jack. What size do I need.

⟐ Commented ottobre 05, 2025 at 11:45 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/914511/Broken+DC+barrel+jack. https://it.ifixit.com/Risposte/View/914511 Sun, 05 Oct 2025 11:45:59 -0700 <![CDATA[Cricut Maker: The pen housing on my Cricut maker just keeps going up and down.]]> My cricut maker just stopped working. The pen housing just keeps going up and down and it doesn’t fully turn on. The load button doesn’t load the mat (and pressing it also just results in the housing going up and down).

Here’s a video of what it is doing:

⟐ Answered giugno 14, 2025 at 14:05 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/836004/The+pen+housing+on+my+Cricut+maker+just+keeps+going+up+and+down. https://it.ifixit.com/Risposte/View/836004 Sat, 14 Jun 2025 14:05:34 -0700 <![CDATA[Cricut Maker: Why is the power button remains in red]]> The power button remains red and does not run anymore

⟐ Answered giugno 04, 2024 at 6:25 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/852790/Why+is+the+power+button+remains+in+red https://it.ifixit.com/Risposte/View/852790 Tue, 04 Jun 2024 06:25:05 -0700 <![CDATA[Cricut Maker: Where in Canada can I buy a replacement belt]]> Where in Canada can I get replacement belt for cricut maker

⟐ Answer edited dicembre 30, 2022 at 0:57 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/761804/Where+in+Canada+can+I+buy+a+replacement+belt https://it.ifixit.com/Risposte/View/761804 Fri, 30 Dec 2022 00:57:20 -0700 <![CDATA[Cricut Explore Air 2: Power won’t come on]]> My adaptor is green but my power will not turn on

]]> https://it.ifixit.com/Risposte/Visualizza/941160/Power+won%E2%80%99t+come+on https://it.ifixit.com/Risposte/View/941160 Tue, 17 Feb 2026 22:56:13 -0700 <![CDATA[Cricut Explore Air 2: The mat doesn’t upload]]> The mat doesn’t upload

]]> https://it.ifixit.com/Risposte/Visualizza/940866/The+mat+doesn%E2%80%99t+upload https://it.ifixit.com/Risposte/View/940866 Sun, 15 Feb 2026 22:32:25 -0700 <![CDATA[Cricut Easy Press 2: E05 on Cricut Easy press 3]]> Right after turning it on, I got the E02 error. After several attempts to turn it on, it started to heat up a little, but then I got the E03 error. I tried turning it on again, and this time I got the E05 error. This error has persisted until now. The last time I used it, it worked without any problems. I've already tried resetting it and unplugging it for a couple of minutes, but nothing worked. Does anyone know what might be wrong?]]> https://it.ifixit.com/Risposte/Visualizza/934369/E05+on+Cricut+Easy+press+3 https://it.ifixit.com/Risposte/View/934369 Mon, 05 Jan 2026 19:44:28 -0700 <![CDATA[Cricut Maker: Get repair piece gear for clamp B]]> Hello everyone

I’ve watched a bunches of YouTube video and dissemble my cricut maker 1 that had a clamp B issue.

After dissembling one piece seemed “melted” or bent I tried to put it back but the dent is broken. I tried to find the detached piece but it’s too specific. Does anybody knows where to find a 3D model of the piece to 3D print it?

I attached some pictures but not sure they uploaded right

Thanks a lot

⟐ Commented dicembre 29, 2025 at 18:19 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/932796/Get+repair+piece+gear+for+clamp+B https://it.ifixit.com/Risposte/View/932796 Mon, 29 Dec 2025 18:19:04 -0700 <![CDATA[Cricut: Cricut Explorer 3 comes up with error code.]]> I recently took my 2022 machine apart because the front roller was offset. I fixed the roller, but now I'm getting this error -45,137.

]]> https://it.ifixit.com/Risposte/Visualizza/916126/Cricut+Explorer+3+comes+up+with+error+code. https://it.ifixit.com/Risposte/View/916126 Mon, 08 Sep 2025 14:12:03 -0700