iFixit - Answers With Device "Coffee Maker"

Keurig B77: Unit will not turn on

Thu, 29 Aug 2024 05:56:07 -0700

Unit suddenly will not function after working fine 1 hour ago. The touch button to turn the unit on will not light up and their is no display on the screen

⟐ Answered agosto 29, 2024 at 5:56 GMT-7

Keurig Elite: My Keurig Will not draw water

Sat, 18 Apr 2026 14:24:13 -0700

My Keurig shows out of water but will not draw water from the reservoir

⟐ Commented aprile 18, 2026 at 14:24 GMT-7

Farberware percolator: Not heating correctly - incomplete perk

Mon, 19 Jan 2026 06:05:28 -0700

This twenty-two year old, 8 Cup SuperFast Percolator FCP280-A, coffee maker is heating the water but no longer perking correctly. The heating process is quitting to soon. It finishes to quickly with extremely weak brew but hot water. A visual examination reveals no burned internal parts. Continuity check shows good. My question is which part to replace, the main element, the fuse link or the thermostat? I found parts for it here: http://www.thepartsbiz.com/Farberware_by...

⟐ Commented gennaio 19, 2026 at 6:05 GMT-7

Keurig Elite: Why is my machine so loud?

Fri, 11 Apr 2025 05:57:18 -0700

My Keurig Elite is great, except that it makes a very loud brewing noise that has gotten worse and worse over time. Is there anything I can do to make it not so noisy? My household's members tend to brew coffee early in the morning when at least one person is asleep.

⟐ Commented aprile 11, 2025 at 5:57 GMT-7

Keurig Coffee Maker: Why is my Keuirg not heating water.

Thu, 13 Nov 2025 04:57:34 -0700

When I push the power button it start dispensing water with out heating the water

⟐ Commented novembre 13, 2025 at 4:57 GMT-7

Keurig K75 Platinum Brewing System: Slow to brew and cup is not full.

Sat, 05 Apr 2025 10:33:50 -0700

My Keurig seems to be working fine without a K-Cup inserted. However with a K-Cup inserted, the coffee dribbles out very slowly and I only get 1/2 of a serving. I have to brew another smaller cup into the first one to fill my mug. I cannot find anything that is stopped up.

⟐ Commented aprile 05, 2025 at 10:33 GMT-7

Starbucks Barista: Machine has lost its prime

Mon, 13 Oct 2025 07:28:45 -0700

lost prime on pump. Machine sat for a while not being used. Doesn't flow water thru..

⟐ Commented ottobre 13, 2025 at 7:28 GMT-7

Keurig K40: Why are all of the lights blinking on the Keurig?

Sat, 20 Dec 2025 08:28:38 -0700

When I turn the Keurig on, all of the indication lights are on and blinking. The Keurig will not produce any coffee when these lights are on.

⟐ Commented dicembre 20, 2025 at 8:28 GMT-7

Mr. Coffee BVMC-SJX33GT: Coffee not brewing but light is on.

Mon, 16 Jun 2025 10:15:15 -0700

The brewing light is on but, no sounds or other signs of brewing. Power is good. Need to also know how to check for particle accumulation.

⟐ Commented giugno 16, 2025 at 10:15 GMT-7

Keurig Elite: Keurig Elite B40 Won't Close

Sun, 24 Apr 2022 07:46:37 -0700

This morning, my Keurig Elite B40 wouldn't brew. I put in a K-cup, and hit the brew button, but no water came out. So, I proceeded to follow some tips I found online for unclogging the needles and checking the tubes. I had to undo the two screws underneath the top housing, so that I could pull it up and check the tubes. I saw nothing wrong with the tubes, so I replaced the screws without doing anything inside the housing.

Now, the top won't close. When I look inside to see what's blocking it, I see a metal tongue back behind the K-cup holder and a bar that looks like it's supposed to slide over the tongue and into a groove. However, the tongue is completely rigid and locked in place, such that the bar would have no hope of sliding back into the groove. I'm assuming the tongue is supposed to have a little give so that the bar can slide over it into the the groove, but since it's rigid, it's impossible to force the handle closed against that pressure.

I didn't mess with anything in this part of the machine - my fingers wouldn't even fit back there. Did I inadvertently mess something up when I slid the top of the housing off to look at the tubes? Help!

Edit:

I added pictures of the metal tongue and the bar I'm talking about, as well as a photo showing how the Keurig won't close. The photo shows as far down as the handle will go in its current state.

⟐ Commented aprile 24, 2022 at 7:46 GMT-7

Keurig K55: Why is my Keurig Classic constantly turning off while brewing?

Mon, 20 Apr 2026 18:52:39 -0700

I put the Keurig brand K cup in, pull down the top, and press the brew button. It works for a split second then the machine turns off and I waste a K Cup. The K Cup just leaks into my cup and I have to remove it and try again because if I try and use the same K Cup it doesn’t taste right! It happens with numerous Keurig branded K Cups including Hot Chocolate, Cafe Caramel, and Cafe Vanilla. It’s been happening at least 3-4 times a week.

This is my third machine I’ve received from Keurig support and it’s still happening. I’ve done all the needle cleaning, reseting, descaling, and many other fixes. The unit is not even 3 months old.

I’m just at a loss of what to do because I don’t see many people having the same problem. I’m also sick and tired of wasting perfectly good K Cups! Anybody have ideas how to permanently fix this?

EDIT & SOLUTION: I've been able to resolve the issue using a work around. This is not a fix and I don't know why Keurig hasn't fixed it after years of this happening.

When using a milk based K Cup, press it into the bottom by hand so the K Cup is punctured. Pull it up and rotate 90º and close the lid. This gives the K Cup two holes and much less pressure. It has worked perfectly since I've been doing this.

⟐ Answered aprile 20, 2026 at 18:52 GMT-7

Keurig Coffee Maker: lid will not close

Thu, 13 Nov 2025 12:02:31 -0700

we have a keurig 2.0

which no longer works. it was purchased 11/29/14. The lid will no longer close.

is there a solution to this problem.

⟐ Commented novembre 13, 2025 at 12:02 GMT-7

Keurig 2.0-400: Cannot close cover, how do it fix it?

Sun, 24 Apr 2022 11:17:35 -0700

I opened it to insert a Kcup and now it won’t close. How can I fix it?

⟐ Answered aprile 24, 2022 at 11:17 GMT-7

Keurig Elite: keurig elite works only with water not k cups

Thu, 29 Jan 2026 20:36:07 -0700

The keurig works fine if you only use water. As soon as you put a k cup itmakes noise but does not brew . I have cleaned every orfice on the unit, including blowing out hoses inside the unit,.Works great if you only want hot water. HELP STARTING TO SHAKE,,,

⟐ Answer edited gennaio 29, 2026 at 20:36 GMT-7

Dolce Gusto Genio: Unit does not discharge water, even without a pod in place.

Fri, 13 Feb 2026 07:08:56 -0700

Tried cleaning the jet - no improvement.

Sounds like the pump is working. Maybe an air-lock in the water system?? Unit has been idle for at least one month.

Can someone provide detailed steps for identifying and correcting a possible air-lock? This would be helpful in narrowing down causes for no water discharge.

⟐ Commented febbraio 13, 2026 at 7:08 GMT-7

Keurig K70 Platinum: Why won't my Keurig brew a full cup?

Mon, 24 Nov 2025 09:58:49 -0700

Every morning I brew a cup of coffee before I go to work. As of lately, I noticed that my cup isn't full. I end up making another batch of coffee, because the cup is partially filled.

⟐ Commented novembre 24, 2025 at 9:58 GMT-7

Mr. Coffee BVMC-SJX33GT: Why does water leak at the base of my coffee maker?

Thu, 27 Jun 2024 16:36:55 -0700

⟐ Commented giugno 27, 2024 at 16:36 GMT-7

Breville Dual Boiler BES900 - BES900XL: Why is my steam wand leaking

Wed, 29 Sep 2021 05:32:32 -0700

Hi all I have a Breville dual boiler bes900 and my steam wand just keeps letting steam out when the machine is at temp every thing else is working fine

⟐ Answered settembre 29, 2021 at 5:32 GMT-7

Mr. Coffee BVMC-SJX33GT: Why does it take so long for my coffee to brew?

Sun, 04 Aug 2024 11:29:50 -0700

My coffee brews at a very slow pace.

⟐ Commented agosto 04, 2024 at 11:29 GMT-7

Ninja Coffee Bar CF086: Drip stop light prevents brewing

Tue, 03 Mar 2026 10:25:45 -0700

I have a ninja coffee bar, had it for 2 years. The drip stop light lit while brewing, and wouldn't brew at all. I replaced the drip tray, and went away with one brew. Light returns. Seems to occur with unbalanced surfaces too, and whenever we slightly move it or shake it, the light MAY go off and brew for a bit. Has anyone taken one apart and disabled the drip stop sensor, and if so, how?

⟐ Commented marzo 03, 2026 at 10:25 GMT-7