<![CDATA[iFixit - Active Questions With Device "Aircraft"]]> https://it.ifixit.com/Risposte/Device/Aircraft/All?rss=yes en-US Sat, 08 Aug 2026 22:18:26 -0700 <![CDATA[DJI Mavic Pro: schermata nera dopo impatto lieve]]> salve, dopo un lieve impatto a terra la videocamera del mavic da schermata nera e il gimbal errore (giroscopio e overload)

i connettori e i cavi sembrano integri e il gimbal si muove al test di accensione.

⟐ Answered ottobre 20, 2018 at 5:33 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/479380/schermata+nera+dopo+impatto+lieve https://it.ifixit.com/Risposte/View/479380 Sat, 20 Oct 2018 05:33:03 -0700 <![CDATA[DJI Phantom 3: Perché perdo il segnale?]]> Salve mi chiamo michael ho una domanda, giorni fa ho acquistato un phantom 3 professional accendendolo per la prima volta ho riscontrato subito problemi nella ricezione del drone.

In poche parole accendendolo in casa, basta allontanare il telecomando da una camera all'altra " 3 metri circa " per far sì che il drone si disconnetta completamente dal radiocomando. Stessa cosa all'aperto , il drone vola e si accende tranquillamente ma raggiungendo una distanza di tre metri sia di altezza o di lontananza il drone si disconnette. Premetto che sono di Verona e leggendo su internet ho visto e capito che esistono le NOFLYZONE e purtroppo ho capito che nella mia zona non posso utilizzare il drone perché mi trovo in una zona protetta di tipo "D" gialla, quindi la mia domanda è perché il drone si disconnette dal telecomando? È un difetto di fabbrica o magari la NOFLYZONE Blocca le recezioni ? Grazie!!!

⟐ Answered luglio 04, 2017 at 12:28 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/403739/Perch%C3%A9+perdo+il+segnale https://it.ifixit.com/Risposte/View/403739 Tue, 04 Jul 2017 12:28:10 -0700 <![CDATA[Sharper Image Mach X drone: Where to find spare props (propellers)]]> Where to find / buy spare props / propellers for the Sharper Image Mach X?

Kings Drone, who seems to be the only one to sell spare parts for a lot of these drones, does not sell them. They seem to be impossible to find!

⟐ Commented agosto 03, 2026 at 4:32 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/828915/Where+to+find+spare+props+(propellers) https://it.ifixit.com/Risposte/View/828915 Mon, 03 Aug 2026 04:32:20 -0700 <![CDATA[E88 drone: propeller moving but not going in air]]> propeller moving but not going in air

⟐ Commented agosto 01, 2026 at 7:55 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/908030/propeller+moving+but+not+going+in+air https://it.ifixit.com/Risposte/View/908030 Sat, 01 Aug 2026 07:55:47 -0700 <![CDATA[Propel Spyder XL: Where can I purchase a remote for this particular drone]]> Where can I get a remote

⟐ Answered agosto 01, 2026 at 0:11 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/966298/Where+can+I+purchase+a+remote+for+this+particular+drone https://it.ifixit.com/Risposte/View/966298 Sat, 01 Aug 2026 00:11:56 -0700 <![CDATA[DJI: Mavic 3t sensor system issuse]]> I have replaced the middle frame of mavic 3t after replacement it is showing Initiliazing sensor system error and Flight control system error. What is the possible cause.

⟐ Commented luglio 31, 2026 at 10:22 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/948855/Mavic+3t+sensor+system+issuse https://it.ifixit.com/Risposte/View/948855 Fri, 31 Jul 2026 10:22:01 -0700 <![CDATA[DJI: Aircraft bound to another account….]]> Hi,

I purchased a Mavic Air 2S from EBay but I’m getting an error on the DJI Fly app that says

“Aircraft bound to another account. Change account and try again.”

I tried to reach the seller and no response. Is it possible to “unbind” the Air 2S from the previous owners DJI account?

⟐ Commented luglio 30, 2026 at 1:04 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/704011/Aircraft+bound+to+another+account%E2%80%A6. https://it.ifixit.com/Risposte/View/704011 Thu, 30 Jul 2026 01:04:58 -0700 <![CDATA[E88 drone: E88 drone is not going in air]]> N88 drone is not going in air

⟐ Answered luglio 26, 2026 at 0:15 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/907197/E88+drone+is+not+going+in+air https://it.ifixit.com/Risposte/View/907197 Sun, 26 Jul 2026 00:15:10 -0700 <![CDATA[E88 drone: E88 drone propeller not spinning]]> My drone crashed in the grass and now only three Propellers are working. How do I fix this???????

⟐ Commented luglio 21, 2026 at 21:26 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/828702/E88+drone+propeller+not+spinning https://it.ifixit.com/Risposte/View/828702 Tue, 21 Jul 2026 21:26:51 -0700 <![CDATA[E88 drone: Only one propellers is working]]> Only one propellers is working

⟐ Commented luglio 18, 2026 at 20:05 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/964466/Only+one+propellers+is+working https://it.ifixit.com/Risposte/View/964466 Sat, 18 Jul 2026 20:05:57 -0700 <![CDATA[E88 drone: only three Propellers are working]]> My drone crashed in the grass and now only three Propellers are working. How do I fix this

⟐ Edited luglio 18, 2026 at 19:54 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/964473/only+three+Propellers+are+working https://it.ifixit.com/Risposte/View/964473 Sat, 18 Jul 2026 19:54:44 -0700 <![CDATA[DJI Mini 3: DJI Mini 3 top shell stuck and getting damaged during removal]]> I am trying to remove the top shell of my DJI Mini 3 to retrieve a screw that fell inside. I've been following the repair guide using plastic opening tools, but the clips are extremely tight and won't release. The plastic housing is starting to get damaged/chewed up from my attempts. Is there a specific starting point or a trick to popping these clips without damaging the drone? I'm stuck on Step 1 of the shell removal. Any advice would be appreciated!

]]> https://it.ifixit.com/Risposte/Visualizza/962695/DJI+Mini+3+top+shell+stuck+and+getting+damaged+during+removal https://it.ifixit.com/Risposte/View/962695 Sun, 05 Jul 2026 18:35:38 -0700 <![CDATA[E88 drone: The ic is heating when battery in connected]]> My drone ic is heating when battery is connected

⟐ Commented giugno 28, 2026 at 6:07 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/948027/The+ic+is+heating+when+battery+in+connected https://it.ifixit.com/Risposte/View/948027 Sun, 28 Jun 2026 06:07:29 -0700 <![CDATA[Drone Components: I want it to fly better]]> I want a plane without a controller; I want it to fly better.

]]> https://it.ifixit.com/Risposte/Visualizza/959224/I+want+it+to+fly+better https://it.ifixit.com/Risposte/View/959224 Thu, 11 Jun 2026 04:56:47 -0700 <![CDATA[E88 drone: Moving all but one of them is moving in other direction]]> Moving all but one of them is moving in other direction

]]> https://it.ifixit.com/Risposte/Visualizza/959179/Moving+all+but+one+of+them+is+moving+in+other+direction https://it.ifixit.com/Risposte/View/959179 Thu, 11 Jun 2026 00:02:12 -0700 <![CDATA[DJI Mavic Air 2: Jello/gimbal motor overloaded/off center camera]]> I have a Mavic air 2 with a few issues after a crash, all related to the camera gimbal.

Before repair:

  • Jello (tried new OEM props, no effect)
  • After flying away for a couple minutes, error 40003 (gimbal motor overloaded) would appear
  • Footage looked fine besides the jello, but previous owner reported the gimbal would sometimes tilt as well
  • Gimbal looked slightly damaged, but everything was intact and all axes rotated freely, both manually and when stabilising the camera

Repair:

  • Replaced gimbal (including mounting board and dampers), but kept the original camera module and cables which did not look damaged
  • Recalibrated gimbal using python

Issues after repair:

  • Jello (even before arming, which I didn't know was possible)
  • Error 40003 soon after powering on, much sooner and more consistently than before
  • Gimbal is tilted and not centered
  • DJI fly gimbal calibration stops at 10%
  • Error 40011 (gimbal calibration failure) (I believe this is normal after using the python method to calibrate the gimbal, but it should still be fully functional)
]]> https://it.ifixit.com/Risposte/Visualizza/956407/Jello-gimbal+motor+overloaded-off+center+camera https://it.ifixit.com/Risposte/View/956407 Sat, 23 May 2026 15:48:34 -0700 <![CDATA[Mavic 2 Zoom: My gimbal (camera ) stop responding after a crush, any idea what to]]> my gimbal (camera ) stop responding after a crush, any idea what to

]]> https://it.ifixit.com/Risposte/Visualizza/956125/My+gimbal+(camera+)+stop+responding+after+a+crush,+any+idea+what+to https://it.ifixit.com/Risposte/View/956125 Thu, 21 May 2026 09:03:30 -0700 <![CDATA[Drone: My drone have brushless motor and it's mother one screw is lost so I d]]> How to fix it

]]> https://it.ifixit.com/Risposte/Visualizza/955674/My+drone+have+brushless+motor+and+it's+mother+one+screw+is+lost+so+I+d https://it.ifixit.com/Risposte/View/955674 Mon, 18 May 2026 08:00:03 -0700 <![CDATA[Sharper Image Mach X drone: Where do I find a motor]]> One of my motors broke and i cant find one

⟐ Commented maggio 16, 2026 at 18:24 GMT-7

]]> https://it.ifixit.com/Risposte/Visualizza/955421/Where+do+I+find+a+motor https://it.ifixit.com/Risposte/View/955421 Sat, 16 May 2026 18:24:48 -0700 <![CDATA[DJI Mini 3: RC lost signal mid flight]]> Drone suddenly loss of control, falls and start trashing around

]]> https://it.ifixit.com/Risposte/Visualizza/954322/RC+lost+signal+mid+flight https://it.ifixit.com/Risposte/View/954322 Sun, 10 May 2026 20:57:11 -0700