Aggiusta le tue cose Community Store
Aiuto

Versione corrente di: oldturkey03

Testo:

-Tom, I just checked on cross referencing the shaver and it comes back from type 5705 to model 6520, 6525,6550 and 6515 flex integral ultra. Braun does not show me a 5705model, but type 5705. I posted this as an an answer so I can post an image, I will delete this once I have clarification.
+Tom, I just checked on cross referencing the shaver and it comes back from type 5705 to model 6520, 6525,6550 and 6515 flex integral ultra. Braun does not show me a 5705model, but type 5705. So your 5705 is actually a 6000 series :) anyhow, batteries for that model are available at places [http://www.electricshaverstore.com/i/1556/single-cell-battery-aa-nimh-1650-mah-pin-tabs.htm|like this.] It is soldered unto the logic board.
-[image|176033]
+[image|176258]
+
+Pos. No. Part Description Part Number
+1 Protective cap 5503074
+2 5000 series shaving foil frame order by description
+3 5000 series cutter block order by description
+4 Swivel frame (black) 5505633
+4 Swivel frame (silver) 5504630
+5 Sealing plate 5503014
+6 Bearing screw 5504046
+7 Screw 5504099
+8 Head carrier (black) 5505634
+8 Head carrier (silver) 5504631
+9 Lower frame 5505032
+10 Chassis with no. 11, 12, 15, 16 5504639
+11 Locking pin 5504087
+12 Spring 5504200
+13 Lever 5504089
+14 Spring 5504090
+15 Latch 5504926
+16 Switch 5504962
+17 Motor 5704627
+18 PCB, cpl. 5505631
+19 Cover, cpl. 5504638
+20 Hood 5504112
+21 Sliding plate; w/no. 22 to 25 5705636
+22 Lever 5504093
+23 Leg spring 5504095
+24 Leg spring 5504092
+25 Transmission lever 5504091
+26 Light insert 5505043
+27 Cord socket, cpl. 5505638
+28 Housing case; with no. 29 (black) 5705632
+28 Housing case; with no. 29 (silver) 5704628
+29 Locking button 5705012
+30 End cap (dark gray) 5705637
+30 End cap (silver) 5705640
+31 Screw 5586038
+32 Plug pin (gray) 5704055
+Cleaning brush 5503120
+Coiled cord 5323015
+Case 5504852
+To disassemble it, follow the service manual :
+"The dismantling procedure is described in a logical order. For individual repairs, the order of the description can be altered.
+· Shaving foil frame (2) - to be unlocked by pushing button "A";
+- to be removed.
+· Cutter block (3) - to be removed.
+· Swivel frame (4) - Unscrew bearing screws (6).
+- Remove swivel frame (4).
+· Plug pins (32) - to be taken off with a needle.
+· End cap (30) - unscrew screws (31).
+- remove end cap (30).
+· Housing case (28) - unlock locking button (29).
+- take off housing case (28).
+· Head carrier (8) - unscrew screws (7).
+- remove head carrier (8).
+· Lower frame (9) - to be removed by prying open with a knife between head
+carrier (8) and lower frame (9).
+· Cover (19) - to be taken off by unhinging the 4 notches "B" on the sides.
+· PCB (18) - to be held underneath the batteries.
+- to be taken out off the chassis (10).
+· Motor (17) - Motor lower side to be unhinged out of plastic holder "C".
+- Motor axis to be pushed out of oscillating bridge.
+· Cord socket (27) - to be removed by snapping out notch "D" in the chassis (10).
+· Light insert (26) - to be pushed out of the chassis (10); to be removed.
+· Hood (20) - to be taken off the leading pins on the left and right sides of the sliding plate (21).
+· Sliding plate (21) - to be pulled upwards out of the chassis (10), when switch is in position" 2". (Care has to be taken that the leg spring (24) and transmission lever (25) do not slip away.)
+
+Reassembly
+The reassembly has to be performed in reversed order. However, attention has to be paid to the following points:
+Sliding plate (21) - Before inserting the sliding plate (21) please ensure that the transmission lever (25) and leg spring (24) are assembled correctly. (If necessary, attach transmission lever (25) with leg spring (24) to pin "E" of the sliding plate, while positioning cam "F" of the lever (22) in the switching coulisse, as shown in diagram).
+
+[image|176264]
+
+
+
+[image|176263]

Stato:

open

Modifica di: oldturkey03

Testo:

-Tom, I just checked on cross referencing the shaver and it comes back from type 5705 to model 6515, 6520 flex integral ultra. Braun does not show me a 5705model, but type 5705. I posted this as an an answer so I can post an image, I will delete this once I have clarification.
+Tom, I just checked on cross referencing the shaver and it comes back from type 5705 to model 6520, 6525,6550 and 6515 flex integral ultra. Braun does not show me a 5705model, but type 5705. I posted this as an an answer so I can post an image, I will delete this once I have clarification.
[image|176033]

Stato:

open

Post originale di: oldturkey03

Testo:

Tom, I just checked on cross referencing the shaver and it comes back from type 5705 to model  6515, 6520 flex integral ultra. Braun does not show me a 5705model, but type 5705. I posted this as an an answer so I can post an image, I will delete this once I have clarification.

[image|176033]

Stato:

open