Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Post originale di: Owen ,

Testo:

Thanks for the tip. I had the same problem and used the drilling solution with a 1.5mm bit.

I snipped the end of a standard biro plastic sheath (the inner bit) and shaved it down to a snug fit in the headphone socket.

After a fair few attempts finally go the drill far enough into the offending article to bite and out it came.

This does require some precision so take care.

Stato:

open