Aggiusta le tue cose Community Store
Aiuto

Versione corrente di: MmPp

Titolo:

Power / Diag. LED is blinking.

Testo:

Recently my E1200 stopped working. First, I tried ''''''power cycling it and now it takes me to the firmware management page I pressed cancel, rebooted again at firmware page.
I guess firmware is corrupted. Tried replacing/upgrading firmware but connection always disconnects, tried different ports, cables and reseting it, nothing happened.
I got it to install firmware after many tries and it did it successfully. After it booted up, I logged back in to reconfigure it changed IP parameter ''(just changed from 1.1 to 2.1)'', saved conf. and it restarted, started blinking again.
Firmware I downloaded is correct for the model.
I̶ ̶d̶o̶n̶’̶t̶ ̶k̶n̶o̶w̶ ̶w̶h̶y̶ ̶i̶t̶ ̶i̶s̶ ̶b̶r̶i̶c̶k̶i̶n̶g̶ ̶i̶t̶s̶e̶l̶f̶ ̶c̶o̶u̶l̶d̶ ̶i̶t̶ ̶b̶e̶ ̶h̶a̶r̶d̶w̶a̶r̶e̶ ̶r̶e̶l̶a̶t̶e̶d̶?̶ ̶i̶s̶ ̶i̶t̶ ̶f̶a̶i̶l̶i̶n̶g̶ ̶I̶ ̶d̶o̶n̶’̶t̶ ̶k̶n̶o̶w̶?̶
-'''EDIT: So I reinstalled firmware again and now it works. reconfigured it again, now it works mostly. DHCP isn’t, but that is just mild annoyance/inconvenience at least I can use the damn router.'''
+'''EDIT: So I reinstalled firmware again and now it works. reconfigured it again, now it works mostly. DHCP isn’t, but that is just mild annoyance/inconvenience at least I can use the %#*@ router.'''

Dispositivo:

linksys e1200 wireless router

Stato:

open

Risposta Accettata:

+698268

Modifica di: MmPp

Titolo:

Power / Diag. LED is blinking.

Testo:

Recently my E1200 stopped working. First, I tried ''''''power cycling it and now it takes me to the firmware management page I pressed cancel, rebooted again at firmware page.
I guess firmware is corrupted. Tried replacing/upgrading firmware but connection always disconnects, tried different ports, cables and reseting it, nothing happened.
I got it to install firmware after many tries and it did it successfully. After it booted up, I logged back in to reconfigure it changed IP parameter ''(just changed from 1.1 to 2.1)'', saved conf. and it restarted, started blinking again.
Firmware I downloaded is correct for the model.
-I don’t know why it is bricking itself could it be hardware related? is it failing I don’t know?
+I̶ ̶d̶o̶n̶’̶t̶ ̶k̶n̶o̶w̶ ̶w̶h̶y̶ ̶i̶t̶ ̶i̶s̶ ̶b̶r̶i̶c̶k̶i̶n̶g̶ ̶i̶t̶s̶e̶l̶f̶ ̶c̶o̶u̶l̶d̶ ̶i̶t̶ ̶b̶e̶ ̶h̶a̶r̶d̶w̶a̶r̶e̶ ̶r̶e̶l̶a̶t̶e̶d̶?̶ ̶i̶s̶ ̶i̶t̶ ̶f̶a̶i̶l̶i̶n̶g̶ ̶I̶ ̶d̶o̶n̶’̶t̶ ̶k̶n̶o̶w̶?̶
+
+'''EDIT: So I reinstalled firmware again and now it works. reconfigured it again, now it works mostly. DHCP isn’t, but that is just mild annoyance/inconvenience at least I can use the damn router.'''

Dispositivo:

linksys e1200 wireless router

Stato:

open

Post originale di: MmPp

Titolo:

Power / Diag. LED is blinking.

Testo:

Recently my E1200 stopped working. First, I tried ''''''power cycling it and now it takes me to the firmware management page I pressed cancel, rebooted again at firmware page.

I guess firmware is corrupted. Tried replacing/upgrading firmware but connection always disconnects, tried different ports, cables and reseting it, nothing happened.

I got it to install firmware after many tries and it did it successfully. After it booted up, I logged back in to reconfigure it changed IP parameter ''(just changed from 1.1 to 2.1)'', saved conf. and it restarted, started blinking again.

Firmware I downloaded is correct for the model.

I don’t know why it is bricking itself could it be hardware related? is it failing I don’t know?

Dispositivo:

linksys e1200 wireless router

Stato:

open