Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 ,

Testo:

lennxo we really would need to see what your screen display looks like. The washed out look commonly is cause by the T-Con board whereas banding around the screen is not a typical error. Also, we need to see the board with the bulging cap etc. Yes, you always want to change those since it is possible that it is the cause or at least a second error
+
+=== Update (06/20/2021) ===
+@pickles23 yes your pictures came through. Please repost the one of your power board. It is really blurry and difficult to make out. The general area of what you marked etc. makes it possible that this is one of your causes. Post images of your other boards as well. That way we know what you got going on board wise.
+
+I should have added this [guide|21499] arlier which would have made it easier for you.

Stato:

open

Post originale di: oldturkey03 ,

Testo:

lennxo we really would need to see what your screen display looks like. The washed out look commonly is cause by the T-Con board whereas banding around the screen is not a typical error. Also, we need to see the board with the bulging cap etc. Yes, you always want to change those since it is possible that it is the cause or at least a second error

Stato:

open