Salta al contenuto principale
Aiuto

Versione corrente di: Dan ,

Testo:

You’ll need to do a bit more digging to isolate out what’s needs fixing.
Follow this guide [guide|7653] doing the first steps to disconnect the battery, then jump down to Step 14 carefully disconnecting the LVDS cable and inspect it and the logic board connector for corrosion
[image|2349481]
-The other end of the cable is a bit harder to get to as that too can face the same problem. At which pointy ou would likely need a new display to fix it.
+The other end of the cable is a bit harder to get to as that too can face the same problem. At which point you would likely need a new display to fix it.

Stato:

open

Post originale di: Dan ,

Testo:

You’ll need to do a bit more digging to isolate out what’s needs fixing.

Follow this guide [guide|7653] doing the first steps to disconnect the battery, then jump down to Step 14 carefully disconnecting the LVDS cable and inspect it and the logic board connector for corrosion

[image|2349481]

The other end of the cable is a bit harder to get to as that too can face the same problem. At which pointy ou would likely need a new display to fix it.

Stato:

open