Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: Sam Goldheart ,

Titolo:

Which conductive ink would you recommend?
Which conductive ink would you recommend?

Testo:

I know this is a bit off topic, however it is repair related. I have an iBook that I am trying to repair. The power connector ripped off the conductive pads, the trace snaps if you go near it with solder! I tried a conductive glue but am not happy with the results, it is waterbased and difficult to control where it's going. I put it on the board but have since removed it because I don't think it will work blah blah blah.

So..[http://www.ebay.co.uk/itm/370515087749?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649|this] is what I originally was looking for, a silver conductive pen so I can "write" the connections with accuracy. Anyone know whether it's good, recommend anything else?

Dispositivo:

conductive inkElectronics
conductive inkElectronics

Stato:

open

Risposta Accettata:

68256

Modifica di: pollytintop ,

Titolo:

Which would you recommend?

Testo:

I know this is a bit off topic, however it is repair related. I have an iBook that I am trying to repair. The power connector ripped off the conductive pads, the trace snaps if you go near it with solder! I tried a conductive glue but am not happy with the results, it is waterbased and difficult to control where it's going. I put it on the board but have since removed it because I don't think it will work blah blah blah.

So..[http://www.ebay.co.uk/itm/370515087749?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649|this] is what I originally was looking for, a silver conductive pen so I can "write" the connections with accuracy. Anyone know whether it's good, recommend anything else?

Dispositivo:

conductive ink

Stato:

open

Risposta Accettata:

68256

Post originale di: pollytintop ,

Titolo:

Which would you recommend?

Testo:

I know this is a bit off topic, however it is repair related. I have an iBook that I am trying to repair. The power connector ripped off the conductive pads, the trace snaps if you go near it with solder! I tried a conductive glue but am not happy with the results, it is waterbased and difficult to control where it's going. I put it on the board but have since removed it because I don't think it will work blah blah blah.

So..[http://www.ebay.co.uk/itm/370515087749?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649|this] is what I originally was looking for, a silver conductive pen so I can "write" the connections with accuracy. Anyone know whether it's good, recommend anything else?

Dispositivo:

conductive ink

Stato:

open