Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: Dan ,

Testo:

@prabs77 - Here’sHere’s a vid showing the steps to re-tin the pads after desoldering the pins from them [https://www.youtube.com/watch?v=M4POV5jnEQA&feature=youtu.be|iMac 21,5" & 27" LVDS Display connector repair] and here is the connector [https://beetstech.com/product/lcd-lvds-cable-connector-30-pin|LCD Display LVDS Cable Connector (30-pin)]
@prabs77 - Here’sHere’s a vid showing the steps to re-tin the pads after desoldering the pins from them [https://www.youtube.com/watch?v=M4POV5jnEQA&feature=youtu.be|iMac 21,5" & 27" LVDS Display connector repair] and here is the connector [https://beetstech.com/product/lcd-lvds-cable-connector-30-pin|LCD Display LVDS Cable Connector (30-pin)]
 
You may want to find someone with the needed tools and skills to put a new connector on. This would be the best solution if you can’t get the pins re-inserted into the shell.

Stato:

open

Post originale di: Dan ,

Testo:

@prabs77 - Here’s a vid showing the steps to re-tin the pads after desoldering the pins from them [https://www.youtube.com/watch?v=M4POV5jnEQA&feature=youtu.be|iMac 21,5" & 27" LVDS Display connector repair] and here is the connector [https://beetstech.com/product/lcd-lvds-cable-connector-30-pin|LCD Display LVDS Cable Connector (30-pin)]

You may want to find someone with the needed tools and skills to put a new connector on. This would be the best solution if you can’t get the pins re-inserted into the shell.

Stato:

open