no display on any monitor that i have tried connecting to my Dell T1650.
Issue happened shortly after switching from legacy to UEFI boot. I went into advanced startup afterwards and selected boot to command prompt because pc was booting straight into windows 10 and skipping BIOS. Now i get a “no signal detected” no matter which cable or monitor i plug into the desktop. Computer comes on, and the hard drive lights come on as well as cpu fan, graphic card fan. etc. No beep code unless i remove all 4 memory sticks which then gives me a 1 3 2 beep code while screen is still not turning on
this is what i have tried
# cleared cmos 5+ times by removing battery (even left battery out overnight)
# swapped out video cables with working cables
# swapped out video cards with known working cards (3 different cards). tried different cards on both pcie x 16 slots to no avail
# tried using onboard graphic card with graphic cards removed
# tried different available video inputs (vga hdmi dvi)
# swapped out the power supply with a new one
# clear cmos via motherboard jumpers 5+ times ( tried with jumper on RTCRST overnight even)
# tried 4+ different monitors
# reseated all memory sticks (added them 1 by 1 on and on different slots
+
# removed all hard drives, added them back 1 by 1
# swapped out power cords with known working cords
# tried different monitors ( 3 working monitors)
# left monitor plugged in overnight with computer running… next morning..still no signal
no display on any monitor that i have tried connecting to my Dell T1650.
Issue happened shortly after switching from legacy to UEFI boot. I went into advanced startup afterwards and selected boot to command prompt because pc was booting straight into windows 10 and skipping BIOS. Now i get a “no signal detected” no matter which cable or monitor i plug into the desktop. Computer comes on, and the hard drive lights come on as well as cpu fan, graphic card fan. etc. No beep code unless i remove all 4 memory sticks which then gives me a 1 3 2 beep code while screen is still not turning on
this is what i have tried
# cleared cmos 5+ times by removing battery (even left battery out overnight)
# swapped out video cables with working cables
# swapped out video cards with known working cards (3 different cards). tried different cards on both pcie x 16 slots to no avail
# tried using onboard graphic card with graphic cards removed
# tried different available video inputs (vga hdmi dvi)
# swapped out the power supply with a new one
# clear cmos via motherboard jumpers 5+ times ( tried with jumper on RTCRST overnight even)
# tried 4+ different monitors
# reseated all memory sticks (added them 1 by 1 on and on different slots
-
# removed all hard drives, added them back 1 by 1
# swapped out power cords with known working cords
# tried different monitors ( 3 working monitors)
# left monitor plugged in overnight with computer running… next morning..still no signal
no display on any monitor that i have tried connecting to my Dell T1650.
Issue happened shortly after switching from legacy to UEFI boot. I went into advanced startup afterwards and selected boot to command prompt because pc was booting straight into windows 10 and skipping BIOS. Now i get a “no signal detected” no matter which cable or monitor i plug into the desktop. Computer comes on, and the hard drive lights come on as well as cpu fan, graphic card fan. etc. No beep code unless i remove all 4 memory sticks which then gives me a 1 3 2 beep code while screen is still not turning on
this is what i have tried
# cleared cmos 5+ times by removing battery (even left battery out overnight)
# swapped out video cables with working cables
# swapped out video cards with known working cards (3 different cards). tried different cards on both pcie x 16 slots to no avail
# tried using onboard graphic card with graphic cards removed
# tried different available video inputs (vga hdmi dvi)
# swapped out the power supply with a new one
# clear cmos via motherboard jumpers 5+ times ( tried with jumper on RTCRST overnight even)
# tried 4+ different monitors
# reseated all memory sticks (added them 1 by 1 on and on different slots
# removed all hard drives, added them back 1 by 1
# swapped out power cords with known working cords
# tried different monitors ( 3 working monitors)
# left monitor plugged in overnight with computer running… next morning..still no signal
doubt its a cpu issue?