Salta al contenuto principale
Aiuto

Versione corrente di: Scott B ,

Titolo:

Fridge temperature display doesn't match reality until power cycle

Testo:

I have a recurring problem with a GE Profile PSB48LSRABV. Here’s an example sequence:
* Fresh food compartment set to 37F on the control panel (for months)
* Thermometer in fridge reads 46F (with lots of water inside per manual)
* Press “Display Temp” button, display shows fridge at 37F
* Turn power off, count to 15, turn power on, wait for control panel to boot
* Press “Display Temp” button, display shows fridge at 46F (matches thermometer!)
* Compressor runs and cools fresh food compartment
* Hours later thermometer in fridge reads 37-38 (yeah!)
* Press “Display Temp” button shows fridge at 37F
* Within days, the fridge is warmer inside again, thermometer inside reads 45+, but display reads 37 - unit needs to be “rebooted” again!
-
-Fresh food thermistor from top of cabinet measured properly in ice water (and warmer water), and condensor coils and fan are clean, so I had techs come give it a shot under home warranty:
+Fresh food thermistor from top of cabinet measured properly in ice water (and warmer water), the unit has always passed all the self-tests, and condensor coils and fan are clean, so I had techs come give it a shot under home warranty:
* Trip 1 - Tech came to assess, ordered new evaporator fan
* Trip 2 - Replaced fresh food evaporator fan (note new fan is working in fridge, and old fan works fine on bench)
* Trip 3 - Ordered main computer PCBA
* Trip 4 - Replaced main computer PCBA
-
Unfortunately, it continues the same cycle of misreading the temperature until power cycles, and taking a day off of work for each visit is getting painful.
Any ideas?

Dispositivo:

Ge Profile refregerator

Stato:

open

Post originale di: Scott B ,

Titolo:

Fridge temperature display doesn't match reality until power cycle

Testo:

I have a recurring problem with a GE Profile PSB48LSRABV.  Here’s an example sequence:

* Fresh food compartment set to 37F on the control panel (for months)
* Thermometer in fridge reads 46F (with lots of water inside per manual)
* Press “Display Temp” button, display shows fridge at 37F
* Turn power off, count to 15, turn power on, wait for control panel to boot
* Press “Display Temp” button, display shows fridge at 46F (matches thermometer!)
* Compressor runs and cools fresh food compartment
* Hours later thermometer in fridge reads 37-38 (yeah!)
* Press “Display Temp” button shows fridge at 37F
* Within days, the fridge is warmer inside again, thermometer inside reads 45+, but display reads 37 - unit needs to be “rebooted” again!

Fresh food thermistor from top of cabinet measured properly in ice water (and warmer water), and condensor coils and fan are clean, so I had techs come give it a shot under home warranty:

* Trip 1 - Tech came to assess, ordered new evaporator fan
* Trip 2 - Replaced fresh food evaporator fan (note new fan is working in fridge, and old fan works fine on bench)
* Trip 3 - Ordered  main computer PCBA
* Trip 4 - Replaced main computer PCBA

Unfortunately, it continues the same cycle of misreading the temperature until power cycles, and taking a day off of work for each visit is getting painful.

Any ideas?

Dispositivo:

Ge Profile refregerator

Stato:

open