Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: oldturkey03 ,

Testo:

@gvidob I’d use a common soldering iron with a small tip. You will need flux and solder to replace it. If you have not soldersoldered on circuit boards before you will have to practice on some old boards first. Consider havingConsidering to have somebody do it for you is ok too. Yes it is possible that your camera overheated. Once you replace the switch, change the battery and then try again. Let us know how it works out.
@gvidob I’d use a common soldering iron with a small tip. You will need flux and solder to replace it. If you have not soldersoldered on circuit boards before you will have to practice on some old boards first. Consider havingConsidering to have somebody do it for you is ok too. Yes it is possible that your camera overheated. Once you replace the switch, change the battery and then try again. Let us know how it works out.

Stato:

open

Post originale di: oldturkey03 ,

Testo:

@gvidob I’d use a common soldering iron with a small tip. You will need flux and solder to replace it. If you have not solder on circuit boards before you will have to practice on some old boards first. Consider having somebody do it for you is ok too. Yes it is possible that your camera overheated. Once you replace the switch, change the battery and then try again. Let us know how it works out.

Stato:

open