Salta al contenuto principale

Post originale di: Minho ,


The PMID pin should be showing a voltage similar to VBUS so what you are measuring is totally normal.  A good trick when trying to understand what a certain Apple-specific IC is doing is to look up similar IC’s that are not “custom-designed” for Apple. The semiconductor industry tends to have pretty normalised nomenclature so theres a good chance you can figure out what PMID means.

For example, a quick search brought me to this [|datasheet]. There are perhaps better fits but this one shows how a PMID is connected internally. As you can see, it is directly connected to VBUS via some diodes.


That’s why you '''should''' see 5V on PMID when the charger is connected.