Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 (dettagli voto) ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]
 
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
 
 
[br]
 
 
I located this, not sure what part of the logic board this is? Do I run wires to these locations? Is this the chip right below the connector?
 
 
 
[image|1670533]
 
[br]
 
 
-Daniel

Dispositivo:

Mac

Stato:

open

Risposta Accettata:

545050

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]
 
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
 
 
[br]
 
 
I located this, not sure what part of the logic board this is? Do I run wires to these locations? Is this the chip right below the connector?

I located this, not sure what part of the logic board this is? Do I run wires to these locations? Is this the chip right below the connector?

 
[image|1670533]
 
[br]
 
 
-Daniel

Dispositivo:

Mac

Stato:

open

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]
 
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
 
 
[br]
 
 
I located this, not sure what part of the logic board this is? Do I run wires to these locations?
 
[image|1670533]
 
[br]
UPDATE: So I found the pins and there locations! (I think) Do I simply just run a wire to them? Hopefully someone can verify with me please. Thank you so much![image|1670533][br]
 
 
-Daniel

Dispositivo:

Mac

Stato:

open

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]
 
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
[br]
UPDATE: So I found the pins and there locations! (I think) Do I simply just run a wire to them? Hopefully someone can verify with me please. Thank you so much![image|1670533][br]
 
 
-Daniel

Dispositivo:

Mac

Stato:

open

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]
 
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
I bought a cheap hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
 
 
-Daniel

Dispositivo:

Mac

Stato:

open

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

[image|1670491]Iimage|1670491]

I
bought a cheapy hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off…off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
[image|1670491]Iimage|1670491]

I
bought a cheapy hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off…off should of just stuck to the regular solder… Is this repairable? It looks like I would be able to run wires possibly? Any info on where to run wires would be greatly appreciated![br]
 
-Daniel

Dispositivo:

Mac

Stato:

open

Modifica di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

I[image|1670491]I bought a cheapy hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off… Is this repairable? It looks like I would be able to run wires possibly?
I[image|1670491]I bought a cheapy hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off… Is this repairable? It looks like I would be able to run wires possibly?
 
-Daniel

Dispositivo:

Mac

Stato:

open

Post originale di: linksfury22 ,

Titolo:

Help, Repair FPC contact pads a1278

Testo:

I bought a cheapy hot air solder iron and applied to much force with tweezers and ended up ripping 5 of the contact pads off… Is this repairable? It looks like I would be able to run wires possibly?

-Daniel

Dispositivo:

Mac

Stato:

open