Salta al contenuto principale
Aiuto

Post originale di: Philip Lambe ,

Testo:

I followed this procedure and had some success.

Some points:

I used Loctite GO2 Gel adhesive with no trouble.

I completely disasembled my switch to solder the wires. There is a hex screw in the back which adjusts the space between the contacts. I found it was quite critical in its adjustment. A bit like tuning a carburettor! If it is too tight or too loose the switch will not function correctly.

[image|1666091]

[image|1666085]

Stato:

open