Salta al contenuto principale

Post originale di: Bernard Hoffman ,


F problems on Kenmore HE washers

First off the hoses plug so you take off the bottom front lower panel three nuts and clean out the small collection area with the turning handle.  It turns to the left to open and then on the back take off the discharge hose and use a small plumbers snake first and then a vacuum to suck out the clog.  After the hoses are cleaned and it still does not start right open the back top lid by taking off the three top bolts and look at the computer and try each connection.  Most of the time a connector is loose or has worked loose over time because of the vibration.  After that most of the time you have a like new machine.