Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Versione corrente di: Ryan Coodey ,

Titolo:

Timer clicking and only fill cycle works

Testo:

Have a Kenmore 500 series.

A few days ago we started with another problem and the spin cycle would not work but everything else did. Replaced the clutch and rebuilt the transmission and the spin cycle worked for a few quick tests. Was excited. Then did a load of laundry and completely different problem now. The timer just makes a clicking sound on any position other than fill and the motor doesnt even try to start.

When I tilted the unit on its side was thinking something maybe got wet. Bad capacitor? Bad timer? I tried putting a cheap multimeter on the capacitor and it seemed ok, but not sure I was checking it right. Maybe something else out of place now? I did accidentally drop it a little hard on its side once.

Thanks a lot!

Dispositivo:

Kenmore Direct Drive Washing Machine

Stato:

open

Risposta Accettata:

519199

Post originale di: Ryan Coodey ,

Titolo:

Timer clicking and only fill cycle works

Testo:

Have a Kenmore 500 series.

A few days ago we started with another problem and the spin cycle would not work but everything else did. Replaced the clutch and rebuilt the transmission and the spin cycle worked for a few quick tests. Was excited. Then did a load of laundry and completely different problem now. The timer just makes a clicking sound on any position other than fill and the motor doesnt even try to start.

When I tilted the unit on its side was thinking something maybe got wet. Bad capacitor? Bad timer? I tried putting a cheap multimeter on the capacitor and it seemed ok, but not sure I was checking it right. Maybe something else out of place now? I did accidentally drop it a little hard on its side once.

Thanks a lot!

Dispositivo:

Kenmore Direct Drive Washing Machine

Stato:

open