Salta al contenuto principale
Aiuto

Versione corrente di: Minho ,

Testo:

The first thing to rule out is a battery issue. I would do the following (in order):
 
# Always try another Lightning cable and charger, preferably Apple original or MFi certified units.
 
# The [https://en.wikipedia.org/wiki/Lightning_(connector)|Lightning cable 8-pin connector] should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.
 
# Change the battery. The battery is the weakest link in the entire phone and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.
 
# If the battery is in good condition (in your case, do this after changing the battery), you can use a [https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=USB+Ammeter|USB Ammeter] to determine if the phone is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port.
 
# If a new battery and charge port still don't resolve the issue, then you either have faulty replacement parts (possible) or a logic board issue.

Stato:

open

Post originale di: Minho ,

Testo:

The first thing to rule out is a battery issue. I would do the following (in order):

# Always try another Lightning cable and charger, preferably Apple original or MFi certified units.

# The [https://en.wikipedia.org/wiki/Lightning_(connector)|Lightning cable 8-pin connector] should be sitting flush with the housing and completely inserted. If it is not, there could be lint/dust/debris inside the port impeding a proper connection. You can clean it out with fine point tweezers or a dental pick. Just be careful not to damage the pins inside the Lightning Port.

# Change the battery. The battery is the weakest link in the entire phone and certainly for charger related issues. It is also the easiest thing to replace. Use a battery utility, such as coconutBattery (for Mac) or 3uTools (for Windows) to test the battery prior to removal. Anything less than 70% of design capacity will require replacement.

# If the battery is in good condition (in your case, do this after changing the battery), you can use a [https://www.amazon.com/s/ref=nb_sb_noss?url=search-alias%3Daps&field-keywords=USB+Ammeter|USB Ammeter] to determine if the phone is really drawing current when it says it's charging. If it isn't drawing current, then I would change the Lightning/Charge Port.

# If a new battery and charge port still don't resolve the issue, then you either have faulty replacement parts (possible) or a logic board issue.

Stato:

open