Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Versione corrente di: mayer ,

Testo:

Take the back off and examine the capacitors for swelling and/or leakage.
 
Next step would be to go over the video board with a soldering iron looking for “cold solders”.
 
You can get a very good electrical jolt from the CRT so look up how to discharge it.
 
Nevermind, here is a video on how to do it:
 
https://www.youtube.com/watch?v=snkMLQskFi4

Stato:

open

Modifica di: mayer ,

Testo:

Take the back off and examine the capacitors for swelling and/or leakage.
 
Next step would be to go over the video board with a soldering iron looking for “cold solders”.
 
You can get a very good electrical jolt from the CRT so look up how to discharge it.

Stato:

open

Post originale di: mayer ,

Testo:

Take the back off and examine the capacitors for swelling and/or leakage.

Next step would  be to go over the video board with a soldering iron looking for “cold solders”.

Stato:

open