Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Versione corrente di: DENIS BRASSARD ,

Titolo:

Why is my washer taking more than 2 hours to cycle

Testo:

My Kenmore top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and found nothing wrong with the machine. But still no change after his visit.

Dispositivo:

Kenmore Direct Drive Washing Machine

Stato:

open

Risposta Accettata:

504086

Modifica di: DENIS BRASSARD ,

Titolo:

Why is my washer taking more than 2 hours to cycle

Testo:

My Kenmore top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and found nothing wrong with the machine. But still no change after his visit.

Dispositivo:

Kenmore Direct Drive Washing Machine

Stato:

open

Risposta Accettata:

504086

Modifica di: DENIS BRASSARD ,

Titolo:

Why is my washer taking more than 2 hours to cycle

Testo:

My WMWKenmore top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and told me there wasfound nothing wrong with the machine. NoBut still no change after his visit.
My WMWKenmore top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and told me there wasfound nothing wrong with the machine. NoBut still no change after his visit.

Dispositivo:

Kenmore 110 SeriesDirect Drive Washing Machine
Kenmore 110 SeriesDirect Drive Washing Machine

Stato:

open

Modifica di: DENIS BRASSARD ,

Titolo:

Why is my washer taking more than 2 hours to cycle

Testo:

My WMW top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and told me there was nothing wrong with the machine. No change after his visit.
My WMW top load washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and told me there was nothing wrong with the machine. No change after his visit.

Dispositivo:

Kenmore 110 Series Washing Machine

Stato:

open

Post originale di: DENIS BRASSARD ,

Titolo:

Why is my washer taking more than 2 hours to cycle

Testo:

My washer seems to do all the cycle steps, but takes more than 2 hours to do so. I had a technician come. No fault on the diagnostic test. He ran the automatic mode and that went fine. Then he did the calibration and told me there was nothing wrong with the machine. No change after his visit.

Dispositivo:

Kenmore 110 Series Washing Machine

Stato:

open