Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Versione corrente di: Sol Lee ,

Testo:

When you glue it back on, make sure to cover all the surface of the cup not just nub parts.
 
If you only glue the nub part you'll have unreliable key register as well as wobbly key cap.
 
and mine is already is f-ed up so good luck with whoever has the same issue.. :)
and mine is already is f-ed up so good luck with whoever has the same issue.. :)
 
also super glue works fine. Just be careful with it.

Stato:

open

Modifica di: Sol Lee ,

Testo:

When you glue it back on, make sure to cover all the surface of the cup not just nub parts.
When you glue it back on, make sure to cover all the surface of the cup not just nub parts.
 
If you only glue the nub part you'll have unreliable key register as well as wobbly key cap.
 
and mine is already is f-ed up so good luck with whoever has the same issue.. :)
 
also super glue works fine. Just be careful with it.

Stato:

open

Modifica di: Sol Lee ,

Testo:

When you glue it back on, make sure to cover all the surface of cup not just nub parts.
 
If you only glue the nub part you'll have unreliable key register as well as wobbly key cap.
 
and mine is already is f-ed up so good luck with whoever has the same issue.. :)
and mine is already is f-ed up so good luck with whoever has the same issue.. :)
 
also super glue works fine. Just be careful with it.

Stato:

open

Modifica di: Sol Lee ,

Testo:

When you glue it back on, make sure to cover all the surface of cup not just nub parts.
When you glue it back on, make sure to cover all the surface of cup not just nub parts.
 
If you only glue the nub part you'll have unreliable key register as well as wobbly key cap.
 
and mine already is f-ed up so good luck with whoever has the same issue.. :)
 
also super glue works fine. Just be careful with it.

Stato:

open

Post originale di: Sol Lee ,

Testo:

When you glue it back on, make sure cover all the surface of cup not just nub parts.

If you only glue the nub part you'll have unreliable key register as well as wobbly key cap.

and mine already is f-ed up so good luck with whoever has the same issue.. :)

Stato:

open