Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Post originale di: cityzen ,

Testo:

From the ignition switch, follow one of the red wires to a fuse holder. Check that fuse and replace it if necessary.

Check the other red wire and follow it to a 3-pin connector.  Make sure that connector is fine, and then keep following the wire to a diode.  If everything else is good, then you might try replacing that diode.  It might be internal to the motor, though.

I found the parts diagrams for your mower by searching for murray + the model number.  They showed the wiring diagram.  You can also get replacement parts there.

Stato:

open