Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 (dettagli voto)

Titolo:

Heat Gun/Blower for Screen Replacement

Testo:

I am looking at purchasing a heat/gun blower to replace my Surface pro 5 screen (warm the adhesive to weaken it)....as well as for other electronics.

I have come across 3-in-1 Function Heat Blower and Soldering Iron (see link below),  which I thought could be helpful with other projects also.

https://www.jaycar.co.nz/3-in-1-function-heat-blower-and-soldering-iron/p/TH1604

Has anyone had any experience using this type of "heat blower"? First thought is it may be difficult to control the temperature...although it does have a flame adjustment setting.

Thanks in advance for your help.

Dispositivo:

Microsoft Surface Pro 5

Stato:

open

Risposta Accettata:

+514336

Post originale di: Daniel Mossman

Titolo:

Heat Gun/Blower for Screen Replacement

Testo:

I am looking at purchasing a heat/gun blower to replace my Surface pro 5 screen (warm the adhesive to weaken it)....as well as for other electronics.

I have come across 3-in-1 Function Heat Blower and Soldering Iron (see link below),  which I thought could be helpful with other projects also.

https://www.jaycar.co.nz/3-in-1-function-heat-blower-and-soldering-iron/p/TH1604

Has anyone had any experience using this type of "heat blower"? First thought is it may be difficult to control the temperature...although it does have a flame adjustment setting.

Thanks in advance for your help.

Dispositivo:

Microsoft Surface Pro 5

Stato:

open