Salta al contenuto principale
Aiuto

Post originale di: sm_vulkus ,

Testo:

Hi Catherine, from what I can see. The choke cable knob is mounted up near the instruments on the handlebars, or at least it should be. Then it runs from there down under the tank and connects to the choke actuator.  The only thing I can think of that has melted would be the plastic outer cable, and this would cause a bit of mischief.

My suggestion would be to remove the tank and trace the cable and see where it runs and how it is attached. Then get yourself another cable, plenty on ebay. And mount it up on the handle bars near the instruments where all the others are and attach it to the frame via a stainless steel zip tie. They usually only run through a  metal 'push tag'. Get some shrink tubing put that over the zip tie shrink it, to protect the cable from chaffing then attach. That should cure your problem.

Take a look at the video below, it will show you what I mean, also mind the language :)

[https://www.youtube.com/watch?v=X2wXzIMMclw|Different bike same story]

Stato:

open