Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: mayer (dettagli voto) ,

Titolo:

How to reconnect left external speaker connection

Testo:

I replaced the battery on my Late 2012 Macbook Pro. When removing the left side external speaker connection, I inadvertently pulled the socket connector off the board. I was trying to pull the connector out of the holder, but pulled the "holder" off the board as well. Now the connector just dangles, there is nothing to hold it onto the board. The internal jack works fine for headset.
 
Is there a way to 'glue' or somehow re-attach this socket connector or would it require replacing the entire board?
 
=== Update (10/10/2017) ===
 
IFixit ,
 
The instructions had a similar connector on each speaker. They were shown as 2 pieces. One attached to the board, and the other attached to it. I was able to separate the ones on the right side easily. The left side, no matter hw hard I tried, would only reveal one piece. I pried underneath it. This is the result. So much for saving a hundred bucks by doing it myself. I can use earbuds, headphones etc. but certainly not convenient.
 
Thanks for looking.
 
Don Sandifer
 
[image|1209612]
 
[image|1209617]
 
[image|1209621]
 
[image|1209622]

Dispositivo:

MacBook Pro 13" Retina Display Late 2012

Stato:

open

Risposta Accettata:

433345

Modifica di: Don Sandifer ,

Titolo:

How to reconnect left external speaker connection

Testo:

I replaced the battery on my Late 2012 Macbook Pro. When removing the left side external speaker connection, I inadvertently pulled the socket connector off the board. I was trying to pull the connector out of the holder, but pulled the "holder" off the board as well. Now the connector just dangles, there is nothing to hold it onto the board. The internal jack works fine for headset.
 
Is there a way to 'glue' or somehow re-attach this socket connector or would it require replacing the entire board?
 
=== Update (10/10/2017) ===
 
IFixit ,
 
The instructions had a similar connector on each speaker. They were shown as 2 pieces. One attached to the board, and the other attached to it. I was able to separate the ones on the right side easily. The left side, no matter hw hard I tried, would only reveal one piece. I pried underneath it. This is the result. So much for saving a hundred bucks by doing it myself. I can use earbuds, headphones etc. but certainly not convenient.
 
Thanks for looking.
 
Don Sandifer
 
image1.jpeg

image2.jpeg

image3.jpeg

image4.jpeg
[image|1209612]
[image|1209617]
[image|1209621]
[image|1209622]
image1.jpeg

image2.jpeg

image3.jpeg

image4.jpeg
[image|1209612]
[image|1209617]
[image|1209621]
[image|1209622]

Dispositivo:

MacBook Pro 13" Retina Display Late 2012

Stato:

open

Modifica di: Don Sandifer ,

Titolo:

How to reconnect left external speaker connection

Testo:

I replaced the battery on my Late 2012 Macbook Pro. When removing the left side external speaker connection, I inadvertently pulled the socket connector off the board. I was trying to pull the connector out of the holder, but pulled the "holder" off the board as well. Now the connector just dangles, there is nothing to hold it onto the board. The internal jack works fine for headset.
 
Is there a way to 'glue' or somehow re-attach this socket connector or would it require replacing the entire board?
 
=== Update (10/10/2017) ===
 
IFixit ,
 
The instructions had a similar connector on each speaker. They were shown as 2 pieces. One attached to the board, and the other attached to it. I was able to separate the ones on the right side easily. The left side, no matter hw hard I tried, would only reveal one piece. I pried underneath it. This is the result. So much for saving a hundred bucks by doing it myself. I can use earbuds, headphones etc. but certainly not convenient.
 
Thanks for looking.
 
Don Sandifer
 
image1.jpeg
 
image2.jpeg
 
image3.jpeg
 
image4.jpeg

Dispositivo:

MacBook Pro 13" Retina Display Late 2012

Stato:

open

Post originale di: Don Sandifer ,

Titolo:

How to reconnect left external speaker connection

Testo:

I replaced the battery on my Late 2012 Macbook Pro. When removing the  left side external speaker connection, I inadvertently pulled the socket connector off the board. I was trying to pull the connector out of the holder, but pulled the "holder" off the board as well. Now the connector just dangles, there is nothing to hold it onto the board. The internal jack works fine for headset.

Is there a way to 'glue' or somehow re-attach this socket connector or would it require replacing the entire board?

Dispositivo:

MacBook Pro 13" Retina Display Late 2012

Stato:

open