9 ott 2017
Testo:
- @acguy3 per SM you need to : + @acguy3 I always wonder if we can build things more complicated ;-). Per SM you need to this : Removal and Installation REMOVAL 1. Remove front bumper fascia. 2. Remove the front combination lamp assembly bolts (A). 3. Pull the front combination lamp assembly (1) toward the vehicle front, detach the harness clip, disconnect connector, and remove the lamp assembly. [image|1207009] INSTALLATION Installation is in the reverse order of removal. • After installation, perform aiming adjustment. + REMOVE FRONT BUMPER FASCIA - REMOVE FRONT BUMPER FASCIA CAUTION: Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with oil. REMOVAL 1. Remove the front grille. 2. Remove the screws at front edge of front fender protectors (RH/LH). 3. Remove the clips and splash shields (RH/LH). 4. Remove the screws, clips and engine undercover. 5. Remove upper screws RH/LH from front bumper fascia at front fender. 6. Pull the outboard edge of front bumper fascia away from vehicle to disengage from the bumper side retainer. 7. Disconnect fog lamp harness connectors (RH/LH), if equipped. 8. Remove the front bumper fascia.
Stato:
open
9 ott 2017
Testo:
@acguy3 per SM you need to : Removal and Installation REMOVAL 1. Remove front bumper fascia. 2. Remove the front combination lamp assembly bolts (A). 3. Pull the front combination lamp assembly (1) toward the vehicle front, detach the harness clip, disconnect connector, and remove the lamp assembly. [image|1207009] INSTALLATION Installation is in the reverse order of removal. • After installation, perform aiming adjustment. + + REMOVE FRONT BUMPER FASCIA CAUTION: + Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with + oil. + REMOVAL - 1. Remove the front grille. - 2. Remove the screws at front edge of front fender protectors (RH/LH). - 3. Remove the clips and splash shields (RH/LH). + + 1. Remove the front grille. + + 2. Remove the screws at front edge of front fender protectors (RH/LH). + + 3. Remove the clips and splash shields (RH/LH). + 4. Remove the screws, clips and engine undercover. + 5. Remove upper screws RH/LH from front bumper fascia at front fender. + 6. Pull the outboard edge of front bumper fascia away from vehicle to disengage from the bumper side retainer. + 7. Disconnect fog lamp harness connectors (RH/LH), if equipped. + 8. Remove the front bumper fascia.
Stato:
open
9 ott 2017
Testo:
@acguy3 per SM you need to : Removal and Installation REMOVAL 1. Remove front bumper fascia. 2. Remove the front combination lamp assembly bolts (A). 3. Pull the front combination lamp assembly (1) toward the vehicle front, detach the harness clip, disconnect connector, and remove the lamp assembly. [image|1207009] INSTALLATION Installation is in the reverse order of removal. • After installation, perform aiming adjustment. + + CAUTION: + Bumper fascia is made of resin. Do not apply strong force to it, and be careful to prevent contact with + oil. + REMOVAL + 1. Remove the front grille. + 2. Remove the screws at front edge of front fender protectors (RH/LH). + 3. Remove the clips and splash shields (RH/LH). + 4. Remove the screws, clips and engine undercover. + 5. Remove upper screws RH/LH from front bumper fascia at front fender. + 6. Pull the outboard edge of front bumper fascia away from vehicle to disengage from the bumper side retainer. + 7. Disconnect fog lamp harness connectors (RH/LH), if equipped. + 8. Remove the front bumper fascia.
Stato:
open
9 ott 2017
Testo:
@acguy3 per SM you need to :
Removal and Installation
REMOVAL
1. Remove front bumper fascia.
2. Remove the front combination lamp assembly bolts (A).
3. Pull the front combination lamp assembly (1) toward the vehicle front, detach the harness clip, disconnect connector, and remove the lamp assembly.
[image|1207009]
INSTALLATION
Installation is in the reverse order of removal.
• After installation, perform aiming adjustment.
Stato:
open