Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti


Post originale di: PJ Sch ,


You don't need the OWC sensor in a 2012 iMac. Apple has a non-standard power connector and this causes the voltage to go awry and cause the fans to run at full speed. What you need to do is get one of those SATA power "Y" splitters and plug your Mac power cord into that and the IMac won't spin up the fans full speed. You will also have to lift the motherboard and plug in a standard SATA data cable into the spare connection on the motherboard. If you do this you're only expense will be the power "Y" splitter and the SATA cable. I've done exactly this on several 2011 iMacs and kept the internal CD-ROM to boot. It will also pass the Apple Hardware Test. ;)