10 feb 2017
Testo:
I haven't been able to get the screw cap off. + + The vice technique didn't work for me. Australian coins aren't up to the challenge. + + [image|1017906] + + I'm going to try soaking the cap to loosen the bond. Here's the vinegar solution bath it is sitting in to dissolve the acid residue. It might not show in the picture, but the ribbon is clear of the solution, and the board is angled to keep the other electronics clear too. Hopefully after a good soak the cap will turn freely. [image|1017896]
Stato:
open
10 feb 2017
Testo:
I haven't been able to get the screw cap off. Here's the vinegar solution bath it is sitting in to dissolve the acid residue. - It might not show in the picture, but the ribbon is clear of the solution, and the board is angled to keep the other electronica clear too. + It might not show in the picture, but the ribbon is clear of the solution, and the board is angled to keep the other electronics clear too. + + Hopefully after a good soak the cap will turn freely. [image|1017896]
Stato:
open
10 feb 2017
Testo:
I haven't been able to get the screw cap off. Here's the vinegar solution bath it is sitting in to dissolve the acid residue. It might not show in the picture, but the ribbon is clear of the solution, and the board is angled to keep the other electronica clear too. - https://goo.gl/photos/n9PTgAbTZycBHF34A+ [image|1017896]
Stato:
open
10 feb 2017
Testo:
I haven't been able to get the screw cap off.
Here's the vinegar solution bath it is sitting in to dissolve the acid residue.
It might not show in the picture, but the ribbon is clear of the solution, and the board is angled to keep the other electronica clear too.
https://goo.gl/photos/n9PTgAbTZycBHF34A
Stato:
open