Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Componenti & Strumenti

Aiuto

Post originale di: Reece ,

Testo:

Open, remove and clean the logic board for liquid damage. Likely there will be corrosion on the bottom of the board.

Intermittent issues (as you described in the comments of @pccheese answer, is usually caused by liquid. This has probably affected some of the soldered components as well.

Check the I/O cable and trackpad cable (both ends) for liquid too, for good measure :)

Stato:

open