Salta al contenuto principale

Aggiusta la tua roba

Diritto alla Riparazione

Store

Aiuto

Versione corrente di: rdklinc ,

Testo:

Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion on the board causing these issues.
Personally I would run both the board and the I/O board through my ultrasonic cleaner. There's probably still gunk/corrosion on the board causing these issues.
 
If the board or I/O board hashave been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.
If the board or I/O board hashave been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

Stato:

open

Post originale di: rdklinc ,

Testo:

Personally I would run both the board and the I/O board through my ultrasonic cleaner.  There's probably still gunk/corrosion on the board causing these issues.

If the board or I/O board has been damaged, an ultrasonic cleaning won't help, but the first step is to remove the gunk and verify that's not the problem.

Stato:

open