Salta al contenuto principale
Aiuto

Versione corrente di: Dan ,

Testo:

Go to this site: [http://www.thebookyard.com/apple_keycaps_clip_select.php?cPath=66_117_457|MacBook Pro Retina Keycaps] to ID your keyboards construction and make sure you got the correct part (there are three different versions).
 
As to putting it on it's a bit tricky!
 
The J & K types have a wire bale which needs to be caught in the slot and the two white plastic hinge pieces need to be mounted to the base, then you put on the keycap and bale wire.
 
The L type is a snap on too but you need to take the white plastic hinge off of the black of keycap and first get it to snap in before you place the space bard keycap on.
 
Here's a good vid: [https://www.youtube.com/watch?v=LCT-CldP_r4|How to remove and clean Macbook Pro keyboard keys] the last part goodsgoes into the space bar.
Here's a good vid: [https://www.youtube.com/watch?v=LCT-CldP_r4|How to remove and clean Macbook Pro keyboard keys] the last part goodsgoes into the space bar.

Stato:

open

Modifica di: Dan ,

Testo:

Go to this site: [http://www.thebookyard.com/apple_keycaps_clip_select.php?cPath=66_117_457|MacBook Pro Retina Keycaps] to ID your keyboards construction and make sure you got the correct part (there are three different versions).
 
As to putting it on it's a bit tricky!
 
The J & K types have a wire bale which needs to be caught in the slot and the two white plastic hinge pieces need to be mounted to the base, then you put on the keycap and bale wire.
 
The L type is a snap on too but you need to take the white plastic hinge off of the black of keycap and first get it to snap in before you place the space bard keycap on.
 
Here's a good vid: [https://www.youtube.com/watch?v=LCT-CldP_r4|How to remove and clean Macbook Pro keyboard keys] the last part goods into the space bar.

Stato:

open

Post originale di: Dan ,

Testo:

Go to this site: [http://www.thebookyard.com/apple_keycaps_clip_select.php?cPath=66_117_457|MacBook Pro Retina Keycaps] to ID your keyboards construction and make sure you got the correct part (there are three different versions).

As to putting it on it's a bit tricky!

The J & K types have a wire bale which needs to be caught in the slot and the two white plastic hinge pieces need to be mounted to the base, then you put on the keycap and bale wire.

The L type is a snap on too but you need to take the white plastic hinge off of the black of keycap and first get it to snap in before you place the space bard keycap on.

Stato:

open