Salta al contenuto principale
Aiuto

Post originale di: hblixt ,

Testo:

Soggy pucks are usually caused by to coarse a grind.

Some times the coffee grounds fall into the boiler valve recess especially when the pucks are not solid and plug the small hole at the bottom of the recess that allows drainage into drip tray. You will see boiler valve in recess behind the brew group  when you remove the brew group.  Beige plastic piece with O-rings. Stick your finger into space beneath there should be no grounds sludge etc. Clean out hole with toothpick and water spray bottle until ware flows freely into drip tray.

Stato:

open