Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 ,

Testo:

jamesfry817 sound slikesounds like a TAB error on your LCD. Put some pressure on the tabs on top of the LCD where the line is and see if pressure on that changes the line.Itit. It might help if you post an image of what you see with your question. That way we could see what you are dealing with. Use [guide|21499|this guide] for that. The TABS are at the end of where the little ribbon cablescables, that go from the LCD controller boardboard, into the LCD panel.
jamesfry817 sound slikesounds like a TAB error on your LCD. Put some pressure on the tabs on top of the LCD where the line is and see if pressure on that changes the line.Itit. It might help if you post an image of what you see with your question. That way we could see what you are dealing with. Use [guide|21499|this guide] for that. The TABS are at the end of where the little ribbon cablescables, that go from the LCD controller boardboard, into the LCD panel.

Stato:

open

Modifica di: oldturkey03 ,

Testo:

jamesfry817 sound slike a TAB error on your LCD. Put some pressure on the tabs on top of the LCD where the line is and see if pressure on that changes the line.It might help if you post an image of what you see with your question. That way we could see what you are dealing with. Use [guide|21499|this guide] for that. The TABS orare the little ribbon cables that go from the LCD controller board into the LCD panel.
jamesfry817 sound slike a TAB error on your LCD. Put some pressure on the tabs on top of the LCD where the line is and see if pressure on that changes the line.It might help if you post an image of what you see with your question. That way we could see what you are dealing with. Use [guide|21499|this guide] for that. The TABS orare the little ribbon cables that go from the LCD controller board into the LCD panel.

Stato:

open

Post originale di: oldturkey03 ,

Testo:

jamesfry817 sound slike a TAB error on your LCD. Put some pressure on the tabs on top of the LCD where the line is and see if pressure on that changes the line.It might help if you post an image of what you see with your question. That way we could see what you are dealing with. Use [guide|21499|this guide] for that. The TABS or the little ribbon cables that go from the LCD controller board into the LCD panel.

Stato:

open