Versione corrente di: Jeff Suovanen

Titolo:

iPad touch screen failed due to logic board?

Testo:

Hi,

A friend gave me her iPad to fix after the digitizer stopped responding. Everything else seems to work fine. The first few times it came back after putting it in Recovery Mode. Finally that stopped working so I did a Total Restore. Now it's stuck on the "Hello" screen and won't go any farther without a swipe.

I took it apart and there were no loose or cracked cables or connectors, so I ordered a replacement digitizer. Replacing the digitizer, and inserting the cable until the white line was gone, had no effect. LCD and all buttons seem to work fine. Is it possibly a logic board issue?

Dispositivo:

Stato:

open

Post originale di: Francis Tanzella

Titolo:

iPad touch screen failed due to logic board?

Testo:

Hi,

A friend gave me her iPad to fix after the digitizer stopped responding. Everything else seems to work fine. The first few times it came back after putting it in Recovery Mode. Finally that stopped working so I did a Total Restore. Now it's stuck on the "Hello" screen and won't go any farther without a swipe.

I took it apart and there were no loose or cracked cables or connectors, so I ordered a replacement digitizer. Replacing the digitizer, and inserting the cable until the white line was gone, had no effect. LCD and all buttons seem to work fine. Is it possibly a logic board issue?

Dispositivo:

iPad 3rd Gen

Stato:

open