Salta al contenuto principale
Aiuto

Versione corrente di: Jeremy coblentz ,

Testo:

I fixed this problem it should work for the 1 beep blue light then powers off..
 
1. Take the top off the ps4
 
2. Remove the screws 2 tension screws to the heat sink.
 
3. Get 2 neoprene washers per screw and place them on the screws. I had a bunch left over from the Xbox 360 X clamp fix
3. Get 2 neoprene washers per screw and place them on the screws. I had a bunch left over from the Xbox 360 X clamp fix
 
Put the 2 screws back ( DON'THE TIGHTENDON'T TIGHTEN THE SCREWS ALL THE WAY!!!)
Put the 2 screws back ( DON'THE TIGHTENDON'T TIGHTEN THE SCREWS ALL THE WAY!!!)
 
4. This is where you have to tweek it until the system powers up.
 
5. Start kind of tight. If it doesn't come on then loosen. ( IT WILL WORK!!!)

Stato:

open

Post originale di: Jeremy coblentz ,

Testo:

I fixed this problem it should work for the 1 beep blue light then powers off..

1. Take the top off the ps4

2. Remove the screws 2 tension screws to the heat sink.

3. Get 2 neoprene washers and place them on the screws.

Put the 2 screws back ( DON'THE TIGHTEN THE SCREWS ALL THE WAY!!!)

4. This is where you have to tweek it until the system powers up.

5. Start kind of tight. If it doesn't come on then loosen. ( IT WILL WORK!!!)

Stato:

open