Salta al contenuto principale
Aiuto

Versione corrente di: oldturkey03 (dettagli voto) ,

Titolo:

Installing New HD cant load OS

Testo:

Hello,

I have a Macbook pro that started  developing HD problems, Last week it the HD failed.

I was able to get it into target mode to recover data.  I tried first to reformat and reinstall Lion,  It would run the installer count down and then when it got to 0 time remaining start over.  I decided that it was toast and purchased a new hd and installed it.  I tried to install the os and using the dvd installers and would try to boot to dvd but would kick it out.  I tried to recover from last backup it would and then not see the hd.

It will boot to external usb hd but not let me install lion.  I tried using the orginal dvd's but would start and then have boot errors writing to the new hd. I am cloneing my current macbook to see if it will take the cone this is in the process so i cannot report if i will be able to do the reverse.  I have tried every trick in my bag to get this new hd to boot the computer but i either get a blank gray screen or blinking ? mark.  One other thing when i do try to boot to it i sometimes here 3 ticks  right after the cimes with 3 lights on the front near the latch or it boots to external hd.  Please help, i am leaning toward that the cable might not be able to handle this hd and not the logic board because it boots to dvd (when it dosnt kick it our) or to the usb hd.

Dispositivo:

MacBook Pro 17" Models A1151 A1212 A1229 and A1261

Stato:

open

Risposta Accettata:

266073

Post originale di: kzysk ,

Titolo:

Installing New HD cant load OS

Testo:

Hello,

I have a Macbook pro that started  developing HD problems, Last week it the HD failed.

I was able to get it into target mode to recover data.  I tried first to reformat and reinstall Lion,  It would run the installer count down and then when it got to 0 time remaining start over.  I decided that it was toast and purchased a new hd and installed it.  I tried to install the os and using the dvd installers and would try to boot to dvd but would kick it out.  I tried to recover from last backup it would and then not see the hd.

It will boot to external usb hd but not let me install lion.  I tried using the orginal dvd's but would start and then have boot errors writing to the new hd. I am cloneing my current macbook to see if it will take the cone this is in the process so i cannot report if i will be able to do the reverse.  I have tried every trick in my bag to get this new hd to boot the computer but i either get a blank gray screen or blinking ? mark.  One other thing when i do try to boot to it i sometimes here 3 ticks  right after the cimes with 3 lights on the front near the latch or it boots to external hd.  Please help, i am leaning toward that the cable might not be able to handle this hd and not the logic board because it boots to dvd (when it dosnt kick it our) or to the usb hd.

Dispositivo:

MacBook Pro 17" Models A1151 A1212 A1229 and A1261

Stato:

open