Salta al contenuto principale
Aiuto

Versione corrente di: Dan ,

Testo:

First, here is the IFIXIT guide for the dual drive setup: [guide|8643|Installing iMac Intel 21.5" EMC 2389 Dual Hard Drive]. While it implies dual Hard Drives it also will support a SSD instead.
If you jump down to Step12 here is the point you take the optical drive thermal sensor off the optical drive and then carefully place it back onto the drives case. This will preserve the SMC signaling so the fans will not go into safe mode (running at full blast).
-If you decide to replace the HD with the SSD. You'll need to buy a replacement thermal sensor as the built-in sensor in the hard drive will not be missing. What I do here is get an optical drive sensor Apple P/N: ''922-9624 Cable, Temp Sensor, Optical Drive'' to use instead of the drives sensor. Follow this IFIXIT guide for all of the details: [guide|6284|iMac Intel 21.5" EMC 2389 Hard Drive Replacement].
+If you decide to replace the HD with the SSD. You'll need to buy a replacement thermal sensor as the built-in sensor in the hard drive will now be missing. What I do here is get an extra optical drive sensor cable, Apple P/N: ''922-9624 Cable, Temp Sensor, Optical Drive'' to use instead of the drives sensor. Follow this IFIXIT guide for all of the details: [guide|6284|iMac Intel 21.5" EMC 2389 Hard Drive Replacement].

Stato:

open

Modifica di: Dan ,

Testo:

-First here is the IFIXIT guide for the dual drive setup: [guide|8643|Installing iMac Intel 21.5" EMC 2389 Dual Hard Drive]. While it implies dual Hard Drives it also will support a SSD instead.
+First, here is the IFIXIT guide for the dual drive setup: [guide|8643|Installing iMac Intel 21.5" EMC 2389 Dual Hard Drive]. While it implies dual Hard Drives it also will support a SSD instead.
If you jump down to Step12 here is the point you take the optical drive thermal sensor off the optical drive and then carefully place it back onto the drives case. This will preserve the SMC signaling so the fans will not go into safe mode (running at full blast).
If you decide to replace the HD with the SSD. You'll need to buy a replacement thermal sensor as the built-in sensor in the hard drive will not be missing. What I do here is get an optical drive sensor Apple P/N: ''922-9624 Cable, Temp Sensor, Optical Drive'' to use instead of the drives sensor. Follow this IFIXIT guide for all of the details: [guide|6284|iMac Intel 21.5" EMC 2389 Hard Drive Replacement].

Stato:

open

Post originale di: Dan ,

Testo:

First here is the IFIXIT guide for the dual drive setup: [guide|8643|Installing iMac Intel 21.5" EMC 2389 Dual Hard Drive]. While it implies dual Hard Drives it also will support a SSD instead.

If you jump down to Step12 here is the point you take the optical drive thermal sensor off the optical drive and then carefully place it back onto the drives case. This will preserve the SMC signaling so the fans will not go into safe mode (running at full blast).

If you decide to replace the HD with the SSD. You'll need to buy a replacement thermal sensor as the built-in sensor in the hard drive will not be missing. What I do here is get an optical drive sensor Apple P/N: ''922-9624 Cable, Temp Sensor, Optical Drive''  to use instead of the drives sensor. Follow this IFIXIT guide for all of the details: [guide|6284|iMac Intel 21.5" EMC 2389 Hard Drive Replacement].

Stato:

open